CNS 10784-1984 Method of Abrasion Test for Building Materials and Building Construction Parts (Falling Sand Method)《建筑材料及建筑组件磨耗试验法（落砂法）》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

BS EN 303-6-2000 Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oi.pdf

BS EN 303-7-2006 Heating boilers - Part 7 Gas-fired central heating boilers nequipped with a forced draught burner of nominal heat output not exceeding 1 000 kW《加热锅炉 第7部分 用标称热输出小于等.pdf

BS EN 3030-1994 Test method for dry film lubricants - Solids content《干膜润滑剂试验方法 固体含量测定》.pdf

BS EN 3032-1994 Test method for dry film lubricants - Thickness measurement《干膜润滑剂试验方法 厚度测量》.pdf

BS EN 3033-2008 Aerospace series — nNuts self-locking nhexagonal with captive nwasher in heat nresisting steel nFE-PA2601 (A286) nuncoated — nClassification n1 100 MPa 425 C《航空航天系列.pdf

BS EN 3034-2009 Aerospace series - Nuts self-locking hexagonal with captive washer - In heat resisting steel FE-PA92HT (A286) silver coated - Classification 1100 MPa 425 《航空航天系列 带附.pdf

BS EN 3043-2008 Aerospace series - Fasteners externally threaded in heat resisting steel FE PA92HT (A286) - Classification 900 MPa 650 C manufacturing method optional - Technical s.pdf

BS EN 3044-1998 Installation holes for inserts screw thread helical coil self-locking - Design standard《螺旋形线圈自锁式螺纹镶嵌件安装孔 设计标准》.pdf

BS EN 3045-1994 Bearings airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 Reduced clearance category - Dimensions and loads《机体轴承 钢制的刚性单列滚珠轴承 0号和.pdf