CNS 14311-1999 Method of determining the tensile strain hardening exponent for metallic sheet and strip《薄板金属材料之加工硬化指数试验法》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

ASTM D6620-2006 Standard Practice for Asbestos Detection Limit Based on Counts《以计数为基础的石棉检测极限用标准实施规程》.pdf

ASTM D6620-2006(2010) 1250 Standard Practice for Asbestos Detection Limit Based on Counts《基于计数测定石棉探测范围标准操作规程》.pdf

ASTM D6621-2000(2006)e1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials《芳香烃材料用加工分析仪的性能检验的标准操作规程》.pdf

ASTM D6621-2000(2012) 3750 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials《芳香烃材料加工分析仪性能检验的标准操作规程》.pdf

ASTM D6621-2000(2017) 5625 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials《芳烃材料过程分析仪性能试验的标准实施规程》.pdf

ASTM D6622 D6622M-2001(2018)e1 5625 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems《完全粘合的热敷增强防水系统的应用标准指南》.pdf

ASTM D6622-2001 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems《完全粘结的热铺增强防水系统应用的标准指南》.pdf

ASTM D6622-2001(2009) 895 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems《完全粘结的热铺增强防水系统应用的标准指南》.pdf

ASTM D6624-2006 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data《利用河.pdf