CNS 3712-1974 Ultrasonic Testing for Metals《金属材料之超音波探伤试验法》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

CSN 25 4263-1961 Screw gauges Reference gauges on wearing for ring thread go gauges Cycle thread《穿过型耐磨环形螺纹检校量规 环形螺纹》.pdf

CSN 25 4264-1961 Screw gauges Measuring parts of reference gauges on wearing for ring thread go gauges Cycle thread《穿过型量规耐磨环形校准螺纹的测量部件 环形螺纹》.pdf

CSN 25 4265-1961 Screw gauges Limit ring thread not go gauges Diameter from 8 to 100 mm Cycle thread《非穿过型规限制环形螺纹 直径8 到100 mm的环形螺纹》.pdf

CSN 25 4266-1961 Screw gauges Reference gauges for ring thread not go gauges Cycle thread《非穿过型规环形螺纹的校准量规 环形螺纹》.pdf

CSN 25 4267-1961 Screw gauges Measuring parts of reference gauges for ring thread not go gauges Cycle thread《非穿过型端螺纹校准量规的测量部件 环形螺纹》.pdf

CSN 25 4300-1961 Screw gauges Survey of limit thread gauges V-thread and edison screw《极限螺纹规的测量》.pdf

CSN 25 4340-1961 Screw gauges Limit thread plug gauges both sided V-thread《双边螺纹极限螺纹插塞规（两侧夹角为80）》.pdf

CSN 25 4341-1961 Screw gauges Measuring parts for go side of thread plug gauges V-thread (angle between flanks 80 grads)《穿过型边螺纹规测量部件 两侧夹角为80的V行螺纹》.pdf

CSN 25 4342-1961 Screw gauges Measuring parts for not go side of thread plug gauges V-thread (angle between flanks=80 grads)《非穿过型边螺纹插塞的测量部件 两侧夹角为80的V型螺纹》.pdf