CNS 5141-1980 Method of Test for Tensile Strength and Elongation at Break of Ebonite《硬橡胶断裂时抗拉强度及伸长率之测定法》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

CNS 13382-20-1995 Implants for Surgery-Partial and Total Hip Joint Prostheses-Part 1 Classification Designation of Dimensions and Requirements《外科植入物–半及全人工髋关节–第一部分：分类、尺寸标示及规定》.pdf

CNS 13382-21-1995 Implants for Surgery - Partial and Total Hip Joint Prostheses Part 2 Bearing Surfaces Made of Metallic and Plastics Materials《外科植入物–半及全人工髋关节–第二部分：由金属及塑料制成之轴承面》.pdf

CNS 13382-24-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 1 Powder form)《外科植入物–超高分子量聚乙烯(第一部分：粉状)》.pdf

CNS 13382-25-1996 Implants for Surgery-Ultra-High Molecular Weight Polyethylene (Part 2 Moulded Form)《外科植入物–超高分子量聚乙烯(第二部分：成形材)》.pdf

CNS 13382-26-1996 Implants for Surgery-Skeletal Pins and Wires (Part 1 Material and Mechanical Requirements《外科植入物–骨针及骨线(第一部分：材料与机械特性要求)》.pdf

CNS 13382-27-1996 Implants for Surgery-Skeletal Pins and Wires (Part 2 Steinmann Skeletal Pins-Dimensions《外科植入物–骨针及骨线(第二部分：STEinMANN骨针–尺度)》.pdf

CNS 13382-28-1996 Implants for Surgery-Staples with Parallel Legs for Orthopaedic Use-General Requirements《外科植入物–骨科使用之平行脚U形钉(一般要求)》.pdf

CNS 13382-29-1996 Implants for Surgery-Metal Bone Screws with Asymmetrical Thread and Sppherical Under Suface (Mechamical Requirementse and Test Methods)《外科植入物–不对称螺纹与球形底面之金属骨螺钉(机械要求及测试方法)》.pdf

CNS 13382-3-2004 Implants for surgery - Metallic materials - Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy《外科体内植入物－金属材料－锻造钴－镍－铬－钼－钨－铁合金》.pdf