CNS 5366-1980 Indirected Test Method for Tensile Strength of Rock《岩石间接抗拉强度试验法》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

ASTM F610 F610M-2000a(2009) Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique.pdf

ASTM F610 F610M-2010 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique《利用热循环技术评估模塑聚(氯乙烯)塑料管.pdf

ASTM F610 F610M-2015 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique《采用热回复技术评定模压聚氯乙烯 (PVC) 塑.pdf

ASTM F615M-1995(2002) Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components [Metric]《测定在半导体元件上喷镀金属的安全电流脉冲操作区域的标准实施规范(.pdf

ASTM F615M-1995(2008) Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)《在半导体元件上喷镀金属的安全电流脉冲操作区域的标准作法(米制)》.pdf

ASTM F615M-1995(2013) Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)《测定在半导体元件上喷镀金属的安全电流脉冲操作区域的标准实施规范 .pdf

ASTM F619-2003 Standard Practice for Extraction of Medical Plastics《医学塑料制品萃取的标准实施规范》.pdf

ASTM F619-2003(2008) Standard Practice for Extraction of Medical Plastics《医用塑料制品萃取的标准实施规程》.pdf

ASTM F619-2014 Standard Practice for Extraction of Medical Plastics《萃取医用塑料的标准实施规程》.pdf