CNS 5986-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears - Tooth form Factor YF《圆柱齿轮与伞齿轮之负载能力计算–齿形因子YF》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

ASTM F1468-2004a Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening《受控通道处搜索和筛查用金属武器检测器的评价用标准实施规程》.pdf

ASTM F1468-2004a(2010) Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening《受控通道处搜查用金属武器检测器的评价用标准实施规程》.pdf

ASTM F1468-2004a(2018) Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening.pdf

ASTM F1469-1999(2004) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing《无损检验用测试设备运行的重复性和再生性研究》.pdf

ASTM F1469-1999(2010) Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing《无损检验用测试设备运行的重复性和再生性研究的标准指南》.pdf

ASTM F1470-2002 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection《特定的机械性能和功能检测用紧固件抽样的标准指南》.pdf

ASTM F1470-2009 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection《特定的机械性能和功能检测用坚固件抽样的标准指南》.pdf

ASTM F1470-2012 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection《特定的机械性能和功能检测用坚固件抽样的标准指南》.pdf

ASTM F1470-2018 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection《规定的机械性能和性能检验用紧固件取样的标准实施规程》.pdf