CNS 6407-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Load Sharing Factor Yε and Overlap Ratio εβ《圆柱齿轮与伞齿轮之负载能力计算-负载分配因子Yε及齿进度比εβ》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

ASTM E1834-1996(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method《电热原子吸收光谱法测定镍合金中铅的标准试验方法》.pdf

ASTM E1834-2009 Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry《用石墨炉原子吸收光谱法测定镍合金中铅含量的标准试验方法》.pdf

ASTM E1834-2011 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry《石墨炉原子吸收光谱法进行镍合金分析的标准试验方法》.pdf

ASTM E1835-1996(2002) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry《火焰原子吸收光谱法分析镍合金的标准试验方法》.pdf

ASTM E1835-1996(2002)e1 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry.pdf

ASTM E1835-2009 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry《火焰原子吸收光谱法对镍合金分析的标准试验方法》.pdf

ASTM E1835-2014 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry《采用火焰原子吸收光谱法分析镍合金分析的标准试验方法》.pdf

ASTM E1836 E1836M-2009(2016) Standard Practice for Building Floor Area Measurements for Facility Management《用于设施管理的建筑楼面面积测量的标准实施规程》.pdf

ASTM E1836 E1836M-2009e1 Standard Practice for Building Floor Area Measurements for Facility Management《机织石棉带的标准规范》.pdf