CNS 9532-1982 Method of Test for Direct Tensile Strength of Intact Rock Core Specimens《完整岩心试样之直接抗拉强度试样法》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

CSN 22 2408-1987 Side-and-face milling (slotting) cutters with replaceable cutting tips Dimensions and technical requirements《带可转位刀片的边面开槽铣刀 尺寸及技术要求》.pdf

CSN 22 2501-1989 Hobbing cutters Hobbing cutters for involute gearing Basic tooth profiles《圆柱形渐开线齿轮滚刀 基本齿廓》.pdf

CSN 22 2504-1973 Gear cutting tools Straight toothed rack-shaped involute gear cutters Basic rules《渐开线齿轮用直牙架状铣刀 基本规程》.pdf

CSN 22 2505-1981 Involute gear shaper cutters with 0 3 - 0 9 mm module《0 3 0 9 mm 模块渐开线齿轮刨齿刀，基本规程》.pdf

CSN 22 2506-1982 Disc involute gear cutters with 1 - 12 mm module Technical requirements《1mm–12mm 渐开线齿轮盘形铣齿刀基本规程》.pdf

CSN 22 2507-1985 Single start gear hobs for involute cylindrical gears with 1 - 25 mm module Technical requirements《1mm – 25mm渐开线圆柱齿轮用单启动齿轮滚刀精度要求》.pdf

CSN 22 2540-1973 Straight toothed rack shaped cutters for involute gearing Pressure angle alpha = 20 degrees《渐开线齿轮用直牙架状铣刀 20压力角》.pdf

CSN 22 2551-1981 Hobs for spur gears with involute tooth profile Main dimensions《带渐开线齿廓的正齿轮滚刀 主要尺寸》.pdf

CSN 22 2570-1976 Shell type gear shaper cutters for involute gears with straight teeth《带直齿盘形齿轮铣刀》.pdf