DIN 29576-1-1992 Aerospace aircraft electrical systems characteristics inactive for new design《航空航天 飞机电气系统特性 不适用于新结构》.pdf

相关资源

ASTM E491-1973(2004)e1 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft《航天飞机热平衡试验用太阳模拟规程》.pdf

ASTM E491-1973(2010) 2500 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft《航天飞机热平衡试验用太阳模拟的标准实施规程》.pdf

BS ISO 15863-2006 Space systems - Spacecraft-to-launch-vehicle interface control document《航天系统 航天飞机与运载工具间接口的控制文献》.pdf

BS ISO 1540-2006 Aerospace - Characteristics of aircraft electrical systems《航空航天 飞机电气系统特性》.pdf

BS ISO 2020-1-1997 Aerospace - Preformed flexible steel wire rope for aircraft controls - Dimensions and loads《航空航天 飞机控制装置的预成形挠性钢丝绳 第1部分 尺寸和负载》.pdf

BS ISO 2020-2-1997 Aerospace - Preformed flexible steel wire rope for aircraft controls - Technical specification《航空航天 飞机控制装置的预成形挠性钢丝绳 第2部分 技术规范》.pdf

DIN 9015-1-1986 Aerospace ISO-fits for airframe construction (except mounting of roller bearings)《航空航天 飞机结构的ISO配合(滚柱轴承的安装除外)》.pdf

DIN 29576-2-1987 Aerospace aircraft electrical systems testing of electrical cables installed in aircraft《航空和航天 飞机电气系统 对飞机里敷设的电缆的检验》.pdf

DIN 29576-3-1991 Aerospace aircaft electrical systems bonding《航空航天 飞机电气系统 接地》.pdf

DIN 29576-4-1993 Aerospace aircraft electrical systems testing of short-circuit behaviour《航空和航天 飞机电气系统 短路特性检验》.pdf

猜你喜欢

ASTM D7291 D7291M-2015 red 8507 Standard Test Method for Through-Thickness &x201c Flatwise&x201d Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite.pdf

ASTM D7292-2006 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)《聚酰胺酰亚胺(PAI)挤压、压模和注模基本型材的标准规范》.pdf

ASTM D7292-2012 5804 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)《聚酰胺酰亚胺 (PAI) 制挤压成型 压模成型和注模成型的基本型材的标准规范》.pdf

ASTM D7292-2018 0000 Standard Specification for Extruded Compression-Molded and Injection-Molded Basic Shapes of Polyamide-Imide (PAI).pdf

ASTM D7293-2006 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)《由聚醚酰亚胺(PEI)制造的挤压和压缩铸模型材的标准试验方法》.pdf

ASTM D7293-2012 8125 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)《聚醚酰亚胺 (PEI) 制挤压成型和压模成型的型材的标准规范》.pdf

ASTM D7294-2006 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site-A Site Contaminated With Chemicals of Interest《污染地点收集处理工艺流程设计数据标准指南 侧重化学污染地点》.pdf

ASTM D7294-2013 red 0625 Standard Guide for Collecting Treatment Process Design Data at a Contaminated SiteA Site Contaminated With Chemicals of Interest《收集被污染场所处理过程设计数据的标准指南 侧重化学污.pdf

ASTM D7295-2006 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources《在燃料渗出液和固定排放源中氰化物取样和测定的标准实施规程》.pdf