DIN 4981-1980 Parting-off tools with carbide tips《硬质合金刀片切断车刀》.pdf

相关资源

JIS B4111-1991 拉制丝和杆用硬质合金模.pdf

JIS B4805-1994 硬质合金圆盘锯.pdf

JIS M3916-1983 矿山工具用硬质合金刀片.pdf

HB 777-1973 1~8级精度用硬质合金圆锥尾量头D6~30mm.pdf

HB 779-1973 1~8级精度用硬质合金套量头双头光面塞规D30~80mm.pdf

HB 781-1973 1~8级精度用硬质合金非全形单头带柄光面规D80~180mm.pdf

HB 787-1973 1~9级精度用硬质合金单头组合卡规D3~10mm.pdf

HB 788-1973 1~9级精度用硬质合金单头圆片形卡规D6~260mm.pdf

HB 798-1974 塞规用硬质合金环毛坯d=4.6~30.8mm.pdf

HB 799-1989 塞规卡规用硬质合金片毛坯.pdf

猜你喜欢

BS PL 4-2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Specification《高强度纤维增强复合物的低压层压用不饱和聚酯树脂的特性 规范》.pdf

BS PL 5-2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Test methods《高强度纤维增强复合物的低压层压用不饱和聚酯树脂 试验方法》.pdf

BS PL 6-2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites - Specification《高强度纤维增强复合物的低压层压用不饱和聚酯树脂 试验方法》.pdf

BS PL 7-2005 Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates - Test methods《玻璃纤维增强叠层制品的低压层压用不饱和聚酯树脂 试验方法》.pdf

BS PL 8-2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Specification《飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料 规范》.pdf

BS PL 9-2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Test methods《飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料 试验方法》.pdf

BS QC 030000-1993 Harmonized system of quality assessment for electronic components - Rectangular connectors for frequencies below 3 MHz - Generic specification - General requiremei.pdf

BS QC 160000-1-1987 Harmonized system of quality assessment for electronic components - Electrical relays - Generic specification electromechanical all-or-nothing relays - Test and.pdf

BS QC 160000-2-1987 Harmonized system of quality assessment for electronic components - Electrical relays - Generic specification electromechanical all-or-nothing relays - Quality .pdf