1、ICS 25.100.20Vollhartmetall-Schaftfrser mit durchgehendem Zylinderschaft MaeIn keeping with current practice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.ForewordThis standard has been prepared by Technical
2、Committee Schaftfrser aus Vollhartmetall of the Normenaus-schuss Werkzeuge und Spannzeuge (Tools and Clamping Devices Standards Committee).AmendmentsThis standard differs from the February 1991 edition in that it has been editorially revised and table 1 hasbeen amended.Previous editionDIN 6528: 1991
3、-02.Ref. No. DIN 6528 : 2002-01English price group 06 Sales No. 010607.02DEUTSCHE NORM January 20026528Continued on pages 2 to 4. No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has
4、the exclusive right of sale for German Standards (DIN-Normen).Solid hardmetal end mills with continuousparallel shankDimensionsSupersedesFebruary 1991 edition.Translation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.Page 2DIN 6528 : 2002-01Page 3DIN 6528 : 2002-01Page 4DIN 6528 : 2002-01
