DIN 7178-2-1986 System of cone tolerances and cone fits for conical workpieces of cones from C = 1 3 to 1 500 and lengths from 6 to 630 mm system of cone fits《锥度C=1 3至1 500及长度6至6.pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

BS S 148-1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)《仅用于锻制螺栓的低镍-铬钢棒规范》.pdf

BS S 153-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (1230-1430 MPa limiting ruling section 40 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件(1230-1430MPa 限定等圆断面40mm)》.pdf

BS S 154-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (880-1080 MPa limiting ruling section 150 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件规范(880-1080MPa 限定等圆断面150m.pdf

BS S 156-1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets bars forgings and parts (1320-1520 MPa)《4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件及零件规范(1320-1520M.pdf

BS S 157-1976 Specification 3% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1180-1380 MPa)《规范 3%镍-铬-钼表面硬化钢方坯、棒材、锻件及零件(1180-1380MPa)》.pdf

BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts《锻制螺栓和螺母的含1%铬-钼钢棒规范》.pdf

BS S 162-1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock forgings bars and parts (1800 MPa double vaccuum melted)《锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa 双倍真空熔化)规范》.pdf

BS S 163-1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock forgings bars and parts (1900 MPa limiting ruling section 100 mm)《锻坯 锻件 棒材和零件用镍-铬-钼-钒钢规范(1900MPa 限定控制剖面100mm.pdf

BS S 164-2002 1 % Chromium-molybdenum steel billets bars forgings and parts (1150 to 1300 MPa Limiting ruling section 16 mm) (Suitable for welding)《航空航天系列 1%铬-钼钢坯 棒材 锻件和部件(1150至1300 MPa 限制截面部分为1.pdf