DB T 9-2004 Specification for the construction of seismic station Geomagnetic station.pdf

相关资源

MT T 1221-2024 液压支架零部件再制造性评价指南.pdf

MT T 1222-2024 液压支架再制造工程设计指南.pdf

MT T 1215-2024 掘锚一体机组掘进技术规范.pdf

MT T 1216-2024 煤矿用带式输送机基本参数和尺寸.pdf

MT T 1220-2024 射线成像识别选煤技术规范.pdf

MT T 1217-2024 煤矿在用带式输送机滚筒轴超声检测方法.pdf

MT T 1211-2024 煤矿井下地质勘探钻孔机器人.pdf

MT T 1210-2024 矿用随钻伽马测井装置通用技术条件.pdf

MT T 1223-2024 露天煤矿排土场土地复垦作物种植技术规程.pdf

MT T 1212-2024 煤矿信息综合承载网通用技术规范.pdf

猜你喜欢

AGMA 08FTM02-2008 A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques《使用振动分析和技术鉴别不良摆线减速组件的方法》.pdf

AGMA 08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear《齿轮表面参数在隙面磨耗上的影响》.pdf

AGMA 08FTM04-2008 The Effect of Manufacturing Microgeometry Variations on the Load Distribution Factor and on Gear Contact and Root Stresses《生产中微几何形状变化对负载分布系数和齿轮啮合和齿根应力的影响》.pdf

AGMA 08FTM05-2008 Gear Failure Analysis Involving Grinding Burn《包含磨险伤的齿轮疲劳分析》.pdf

AGMA 08FTM06-2008 Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth《带对称和非对称轮齿的齿轮用轮齿倒角齿廓的优化》.pdf

AGMA 08FTM07-2008 Planetary Gearset Lubrication Requirement Estimation Based on Heat Generation《基于热生成的行星齿轮组润滑剂要求评估》.pdf

AGMA 08FTM08-2008 PM Materials for Gear Applications《齿轮用PM材料》.pdf

AGMA 08FTM09-2008 Concept for a Multi Megawatt Wind Turbine Gear and Field Experience《多兆瓦风力涡轮机齿轮和野外经验用概念》.pdf

AGMA 08FTM10-2008 The Effect of Superfinishing on Gear Micropitting Part II《超精加工对齿轮微点蚀的影响 第II部分》.pdf