DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf

上传人:postpastor181 文档编号:668396 上传时间:2018-12-25 格式:PDF 页数:60 大小:1.21MB
下载 相关 举报
DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf_第1页
第1页 / 共60页
DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf_第2页
第2页 / 共60页
DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf_第3页
第3页 / 共60页
DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf_第4页
第4页 / 共60页
DIN EN 15611-2011 Railway applications - Braking - Relay valves German version EN 15611 2008+A1 2010《轨道交通 制动 继动阀 德文版本EN 15611-2008+A1-2010》.pdf_第5页
第5页 / 共60页
点击查看更多>>
资源描述

1、January 2011 Translation by DIN-Sprachendienst.English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 45.060.01!$l“1739629www.din.deDDIN EN 15611Railway applications Braking Relay valves (includes Amendment A1:2010)English translation of DIN EN 15611:2011-01Bahnanwendungen Bremse Relaisventile (enthlt nderung A1:2010)Englische bersetzung von DIN EN 15611:2011-01Applications ferroviaires Freinage R

3、elais pneumatiques (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 15611:2011-01SupersedesDIN EN 15611:2010-07www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.6012.10 DIN EN 15611:2011-02 A comma is used as the decimal mark

4、er. National foreword This standard has been prepared by Technical Committee CEN/TC 256 “Railway applications” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Fahrweg und Schienenfahrzeuge (Railway Standards Committee), Working Committee N

5、A 087-00-03 AA Bremse. Amendments This standard differs from DIN EN 15611:2010-07 as follows: a) Annex ZA concerning the relationship between this standard and EU Directives has been brought in line with the essential requirements of the new Directive 2008/57/EC on the interoperability of the rail s

6、ystem within the Community. Previous editions DIN EN 15611: 2010-07 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15611:2008+A1 October 2010 ICS 45.060.01 Supersedes EN 15611:2008 English Version Railway applications Braking Relay valves Applications ferroviaires Freinage Relais pneumatique

7、s Bahnanwendungen Bremse Relaisventile This European Standard was approved by CEN on 27 September 2008 and includes Amendment 1 approved by CEN on 30 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

8、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

9、German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cy

10、prus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

11、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15611:2008+A1:2010: EEN 15611:2008+A1:2010 (E) 2 Contents Page Fo

12、reword 41 Scope 52 Normative references 53 Terms and definitions, symbols and abbreviations .53.1 Terms and definitions .53.2 Symbols 93.3 Abbreviations 104 Design and manufacture 104.1 General . 104.2 Functional requirements 124.2.1 Minimum output pressure 124.2.2 Accuracy of the output pressure an

13、d changeover 134.2.3 Load signal characteristics . 134.2.4 Enabling of a change of relay valve ratio during brake application of a relay valve of type B1 . 144.2.5 Prevention of a change of relay valve ratio during brake application of a relay valve of type B2 and a variable load relay valve, types

14、C, C1, D, E . 144.2.6 Kinked characteristic of a variable load relay valve (type E) . 144.2.7 Interaction of a relay valve and a distributor valve . 154.2.8 Hysteresis 164.2.9 Sensitivity 164.2.10 Flow 164.2.11 Leakage 164.2.12 Change of relay valve ratio 164.3 Shock and vibration . 174.4 Environmen

15、t requirements 174.4.1 General . 174.4.2 Temperature 174.4.3 Other environmental conditions . 184.5 Compressed air quality 194.6 Service life . 204.7 Fire behaviour . 204.8 External appearance . 204.9 Design requirements regarding pressure stress 204.10 Interface . 204.10.1 General . 204.10.2 Mechan

16、ical . 204.10.3 Pneumatic 205 Materials 216 Type tests 216.1 General . 216.2 Individual relay valve tests 216.2.1 Test bench for individual relay valves 216.2.2 Sampling for type tests 246.2.3 Test temperature and air quality . 246.2.4 Procedure for type tests 247 Routine test and inspection . 478 T

17、ype-validation 47DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 3 9 Documentation 4710 Designation 4811 Identification and marking 48Annex A (informative) In-service trial . 49A.1 General . 49A.2 Test set-up and sampling . 49A.3 Procedure . 49A.4 Pass/fail criteria . 49Annex B (informative) Static v

18、ehicle and running tests . 50B.1 General . 50B.2 Test recommendations . 50B.2.1 Variable load relay valve . 50B.2.2 Empty/load relay valve 51Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC of the European Parliament and of

19、 the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)“ . 52!deleted text“ Bibliography 58DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 4 Foreword This document (EN 15611:2008+A1:2010) has been prepared by Technical Committee CEN/TC 256 “Railway applic

20、ations”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Att

21、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-08-30. This document supersed

22、es EN 15611:2008. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European Commission and the European Free Trade Association, and supports essential requirements o

23、f EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Sta

24、ndard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki

25、ngdom. DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 5 1 Scope This European Standard is applicable to relay valves designed to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device, and in

26、 response to a change in vehicle load that is either continuously variable or in two stages i.e. empty - loaded. Relay valves operating with other pressures, in particular the brake pipe pressure, are not included. This European Standard specifies the requirements for the design, manufacture and tes

27、ting of relay valves. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1

28、4478:2005, Railway applications Braking Generic vocabulary EN 15355, Railway applications Braking Distributor valves and distributor-isolating devices EN 15625, Railway applications Braking Automatic variable load sensing devices EN 50125-1, Railway applications Environmental conditions for equipmen

29、t Part 1: Equipment on board rolling stock EN 60721-3-5:1997, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 5: Ground vehicle installations (IEC 60721-3-5:1997) EN 61373:1999, Railway applications Rolling stock eq

30、uipment Shock and vibration tests (IEC 61373:1999) EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) ISO 8573-1:2001, Compressed air Part 1: Contaminants and purity classes 3 Terms and definitions, symbo

31、ls and abbreviations For the purposes of this document, the terms and definitions, symbols and abbreviations given in EN 14478:2005 and the following apply. 3.1 Terms and definitions 3.1.1 relay valve device, the main function of which is to control a pneumatic output pressure as a function of the v

32、ariation of one or more input pressures NOTE 1 See Figure 1. DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 6 Key 1 first input pressure 2 second input pressure 3 control signal - continuous load sensing pressure (Lcp), or control signal - empty/load signal pressure (Lsp), or mechanical input (lever

33、) or electrical input 4 auxiliary reservoir pressure, supply pressure (AR) 5 output pressure 6 relay valve Figure 1 Relay valve, pressures and control signals NOTE 2 The definition of “relay valve” in EN 14478 is specific to a load dependant relay valve. This EN standard considers one or more input

34、pressures in accordance with the diagram in Figure 1. 3.1.2 input pressure control pressure received by the relay valve NOTE Pressure generally considered as being the output pressure from a distributor or a brake control unit; sometimes referred to as pilot pressure or dummy brake cylinder pressure

35、. 3.1.3 output pressure pressure output from the relay valve NOTE Pressure generally considered as being the brake cylinder pressure when the relay valve is used in a variable load braking system. This pressure can also be used as the input pressure to another relay valve. The output pressure can ob

36、tain one, two or three fixed levels or it can be changed continuously between a minimum and a maximum or vice versa. 3.1.4 relay valve ratio ratio of the output pressure to input pressure DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 7 3.1.5 control signal signal received from the continuous load s

37、ensing device (Lcp) or empty - loaded changeover device (Lsp) or a mechanical input (lever) or an electrical input that varies the relay valve ratio dependant on vehicle load NOTE This can also be a speed signal or other parameter, dependant on the relay valve application. 3.1.6 Relay valve types 3.

38、1.6.1 single stage relay valve relay valve type A relay valve with one fixed relay valve ratio, where the ratio can be less (step-down), equal or greater (step-up) than 1 3.1.6.2 multi stage relay valve relay valve type B relay valve with more than one fixed relay valve ratio, where the ratios can b

39、e less (step-down), equal or greater (step-up) than 1 3.1.6.2.1 relay valve type B1 multi stage relay valve that can change relay valve ratio during a brake application NOTE Typically used on vehicles normally operated in empty or fully loaded condition. 3.1.6.2.2 relay valve type B2 multi stage rel

40、ay valve where a change of relay valve ratio cannot take place during a brake application NOTE Blocking the relay valve ratio during brake application is typically used to avoid frequent changeovers taking place on vehicles operated near the changeover weight. 3.1.6.2.3 empty/load relay valve specif

41、ic type of multi stage relay valve (type B1 or B2) with only two stages, giving an empty (tare) or a loaded output pressure proportional to input pressure dependant on the load signal input 3.1.6.3 variable load relay valve relay valve type C relay valve with a continuously changeable relay valve ra

42、tio, where a load signal is used to change the ratio 3.1.6.4 multi stage variable load relay valve relay valve type C1 relay valve with a continuously changeable relay valve ratio, where a load signal is used to change the ratio and with a multi stage feature added NOTE Typically a load signal is us

43、ed to change the relay valve ratio and a control signal (automatic or manual) is used to change the stage(s). The typical result is that at the same load and input pressure, in the lower stage (e.g. P-mode, passenger train) results a lower output pressure and in a higher stage (e.g. R-mode, rapid pa

44、ssenger train) this results in a higher output pressure. 3.1.6.5 two (multi) input relay valve relay valve type D relay valve (type A, B or C) with two (or more) input pressures, controlling a single output pressure DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 8 3.1.6.6 variable load relay valve w

45、ith kinked characteristic relay valve type E variable load relay valve (Type C) with a special, non-linear characteristic, which automatically comes into operation when the vehicle has more than a certain load NOTE This function reduces (in comparison with a linear characteristic) the output pressur

46、e for low input pressures to a certain level to limit the heat impact to the wheels during continuous braking. 3.1.7 sensitivity change of input pressure causing a variation of output pressure, when the change of input pressure is in the same direction, with no overshoot or reversal 3.1.8 initial se

47、nsitivity change of input pressure, starting at 0 bar which causes the output pressure to start increasing NOTE See Figure 2. 3.1.9 sensitivity at reversal change of input pressure causing a variation of output pressure, when the change of input pressure is changing its direction from increasing to

48、decreasing NOTE See Figure 2. 3.1.10 hysteresis difference in output pressure with the same input pressure, where the input pressure is first rising to a value and then, having been taken past that value, subsequently falls to the same value NOTE See Figure 2. DIN EN 15611:2011-02 EN 15611:2008+A1:2010 (E) 9 Key 1 initial sensitivity 2 hysteresis 3 sensitivity at reversal NOTE The figure is

展开阅读全文
相关资源
猜你喜欢
  • ASTM D4320-2004 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters《达到设计强度参数的化学灌浆土壤样品的实验室制备标准规程》.pdf ASTM D4320-2004 Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters《达到设计强度参数的化学灌浆土壤样品的实验室制备标准规程》.pdf
  • ASTM D4321-2004 Standard Test Method for Package Yield of Plastic Film《塑料薄膜的包装屈服点的标准试验方法》.pdf ASTM D4321-2004 Standard Test Method for Package Yield of Plastic Film《塑料薄膜的包装屈服点的标准试验方法》.pdf
  • ASTM D4321-2015 Standard Test Method for Package Yield of Plastic Film《塑料薄膜的包装屈服点的标准试验方法》.pdf ASTM D4321-2015 Standard Test Method for Package Yield of Plastic Film《塑料薄膜的包装屈服点的标准试验方法》.pdf
  • ASTM D4323-1984(2003) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《反射系数变化速率法对大气中硫化氢含量的标准试验方法》.pdf ASTM D4323-1984(2003) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《反射系数变化速率法对大气中硫化氢含量的标准试验方法》.pdf
  • ASTM D4323-1984(2009) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《通过反射变化的比率对空气中硫化氢的标准试验方法》.pdf ASTM D4323-1984(2009) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《通过反射变化的比率对空气中硫化氢的标准试验方法》.pdf
  • ASTM D4323-2015 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《利用反射变化比率的大气中硫化氢的标准试验方法》.pdf ASTM D4323-2015 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance《利用反射变化比率的大气中硫化氢的标准试验方法》.pdf
  • ASTM D4325-2002 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电和电绝缘橡胶带的标准试验方法》.pdf ASTM D4325-2002 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电和电绝缘橡胶带的标准试验方法》.pdf
  • ASTM D4325-2008 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电及电绝缘橡胶带的标准试验方法》.pdf ASTM D4325-2008 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电及电绝缘橡胶带的标准试验方法》.pdf
  • ASTM D4325-2013 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电及电绝缘橡胶带的标准试验方法》.pdf ASTM D4325-2013 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes《非金属半导电及电绝缘橡胶带的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > DIN

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1