DIN EN 62004-2010 Thermal-resistant aluminium alloy wire for overhead line conductor (IEC 62004 2007 modified) German version EN 62004 2009《架空导线用耐热铝合金导线 (IEC 62004-2007 修改采用) 德文版本 .pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

ASTM D2557-1998(2017) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55 C (−450 to −67 F).pdf

ASTM D2680-2001(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping《丙烯腈-丁二烯-苯乙烯共聚物 (ABS) 和聚氯.pdf

ASTM D3596-2014 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins《通用聚氯乙烯 (PVC) 树脂中凝胶 (斑点) 测定的标准实施规程》.pdf

ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf

ASTM D4625-2016e1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 C (110 F)《在43摄氏度(110 F)下的中间馏分燃料储存稳定性的标准测试方法》.pdf

ASTM D4680-1998(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷法(木材对木材)测定胶粘剂静剪切蠕变和破坏时间的标准试验方法》.pdf

ASTM D4682-1987(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性》.pdf

ASTM D4682-2008 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规范》.pdf

ASTM D4682-2013 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格》.pdf