1、REVISIONS LTR DESCRIPTION DATE APPROVED A Change CAGE 14933 to 037Z3. Replace MIL-G-45204 with ASTM B488. Editorial change throughout. 12/18/01 Robert M Heber Prepared in accordance with MIL-STD-100 REV PAGE REV A A A A A A A A A REV STATUS OF PAGES PAGE 1 2 3 4 5 6 7 8 9 PREPARED BY PMIC - G Willia
2、m Carpenter DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO 43216-5000 CHECKED BY TITLE Carl Dello-Stritto APPROVED BY Randy Larson SOCKET, PLUG-IN ELECTRONIC COMPONENTS, SINGLE IN-LINE SIZE CAGE CODE 037Z3 DWG. NO. 93014 Original date of drawing 7 June 1993 A REV A PAGE 1 OF 9 AMSC N/A 5935-E643-037
3、 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 2 NOTES: 1. Dime
4、nsions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parentheses. 4. Unless otherwise specified, all tolerance shall be .005 inch (0.13 mm). 5. Part is to be free of burrs and sharp edges except as noted. 6. Dimensions apply after plating.
5、7. Retention design may be barbed or knurled. FIGURE 1. Dimension and configuration. Pin style 01 Soldertail (see table II) Pin style 02 Wire wrap (see table II) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFEN
6、SE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 3 REQUIREMENTS: Sockets shall meet the requirements of MIL-DTL-83734 (MIL-DTL-83505) except as specified herein. Dimensions and configuration: See figure 1, table I, and table II. Socket construction: Four tapered entry (standard) or si
7、x finger tapered entry (low insertion force), contact style A (2 piece contacts) of MIL-DTL-83734 or MIL-DTL-83505 design and construction. Materials: Insulator: Glass-or mineral-filled nylon in accordance with ASTM D4066 or glass-filled thermoplastic in accordance with MIL-M-24519. All plastic mate
8、rial shall be flammability rated V-0 or better in accordance with UL-94. Socket body: hard brass composition 22 in accordance with ASTM B16. Socket contacts: Beryllium copper in accordance with ASTM B194 or ASTM B196. Socket contact plating: Contact plating shall be 30 microinches (0.76 m) minimum o
9、f gold in accordance with ASTM B488, type 3, code C, class 0.76. Sleeve plating: Sleeve plating shall be 10 microinches (0.25m) of gold minimum in accordance with ASTM B488, type 3, code C, class 0.25, or tin-lead in accordance with SAE-AMS-P-81728, 50 to 97 percent tin, 100 microinches minimum (2.5
10、4m). Nonfunctional areas need not be plated, provided they do not cause degradation in performance. Electrical: Current rating: 1 ampere (maximum). Contact resistance: 5 milliohms (maximum). Dielectric withstanding voltage: 1,000 volts rms (sea level). Insulation resistance: 5,000 megohms (minimum).
11、 Capacitance (contact to contact): 0.4 pF (maximum). Environmental: Temperature range: See table III. Resistance to soldering heat: Only applicable to “H” temperature range, see table III and shall be tested in accordance with EIA 364-52, procedure 4. Provided by IHSNot for ResaleNo reproduction or
12、networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 4 Mechanical: Test gauge mating force: In accordance with MIL-DTL-83734. Insertion force (standard): 16 ozf (4.4 N) maximum per contact, after 12
13、insertions with .017 inch (0.43 mm) diameter test pin. Withdrawal force (standard): 1.5 ozf (0.42 N) minimum per contact, after 12 insertions with .017 inch (0.43 mm) diameter test pin. Insertion force (low insertion force (LIF) socket): 5.5 ozf (1.5 N) maximum per contact after 12 insertions with .
14、018 inch (0.46 mm) diameter test pin. Withdrawal force (low insertion force (LIF) socket): .35 ozf (0.1 N) minimum per contact, after 12 insertions with .018 inch (0.46 mm) diameter test pin. Pin retention in insulator: 5 lbf (22 N) minimum barb design. 2 lbf (8.9 N) minimum knurl design. Vibration:
15、 In accordance with MIL-DTL-83734. Mechanical shock: In accordance with MIL-DTL-83734. Socket durability: 50 cycles in accordance with MIL-DTL-83734. Corrosive atmosphere: In accordance with MIL-DTL-83734. Wrappost: The wrappost geometry shall be in accordance with figure1. Both tips of the contact
16、shall be beveled to facilitate insertion into the bit of the wire-wrap tooling. Wrappost shall be square in position relative to the insulators wall. A maximum 10 deflection in either direction is acceptable. Interface: Mating lead: .015 to .022 inch (0.38 to 0.55 mm) diameter. Mating lead length: .
17、095 to .155 inch (2.41 to 3.94 mm). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 5 TABLE I. Dimension A. 1/ 2/ 3/ Number of positions Dimension
18、 Number of positions Dimension 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 .100 (2.54) .200 (5.08) .300 (7.62) .400 (10.16) .500 (12.70) .600 (15.24) .700 (17.78) .800 (20.32) .900 (22.86) 1.000 (25.40) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.400 (35.56) 1.500 (38.10) 1.600 (40.64) 1.7
19、00 (43.18) 1.800 (45.72) 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1.900 (48.26) 2.000 (50.80) 2.100 (53.34) 2.200 (55.88) 2.300 (58.42) 2.400 (60.96) 2.500 (63.50) 2.600 (66.04) 2.700 (68.58) 2.800 (71.12) 2.900 (73.66) 3.000 (76.20) 3.100 (78.48) 3.200 (81.28) 3.300 (83.82) 3.400 (8
20、6.36) 3.500 (88.90) 3.600 (91.44) 3.700 (93.98) 1/ Dimensions are in inches. 2/ Metric equivalents are in parentheses. 3/ Metric equivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3
21、93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 6 TABLE II. Pin style. 1/ 2/ 3/ Dash no. Lead length “A” .015 Overall length “B” .015 Pin style (see figure 1) 01 .125 (3.175) .300 (7.62) 01 solder tail 02 .143 (3.63) .318 (8.08) 01 solder tail 03 .510 (12.95) .703 (17.86)
22、02 wire wrap 04 .125 (3.175) .300 (7.62) 01 (LIF) solder tail 05 .143 (3.63) .318 (8.08) 01 (LIF) solder tail 06 .510 (12.95) .703 (17.86) 02 (LIF) wire wrap 1/ Dimensions are in inches. 2/ Metric equivalents are in parentheses. 3/ Metric equivalents are given for information only. TABLE III. Temper
23、ature range. Pin designator Temperature range C 1/ Blank -40 to +105 M -55 to +125 H -65 to +220 1/ For wave soldering, a mounting fixture is recommended. Marking: The Part or Identifying Number (PIN) shall be marked on the housing and package in accordance with MIL-STD-1285. The PIN shall include t
24、he complete DSCC PIN, manufacturers name or CAGE code, and date code. The marking shall be permanent and legible in accordance with method 215 of MIL-STD-202. The PIN shall be constructed in the following format: 93014 - XX - XX Z DSCC drawing Number of positions Pin style Temperature range number (
25、see table I) (see table II) (see table III) Applicable note: The sockets may “break away” at the insulator provided no metal is exposed and no degradation in performance occurs. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 0
26、37Z3 93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 7 Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has be
27、en submitted to DSCC-VAI. Vendor PIN 1/ Vendor CAGE OEBT2 2/ PIN style (see table II) DSCC drawing PIN Dash 01 Dash 02 Dash 04 93014-01-XXZ 93014-02-XXZ 93014-03-XXZ 93014-04-XXZ 93014-05-XXZ 93014-06-XXZ 93014-07-XXZ 93014-08-XXZ 93014-09-XXZ 93014-10-XXZ 93014-11-XXZ 93014-12-XXZ 93014-13-XXZ 9301
28、4-14-XXZ 93014-15-XXZ 93014-16-XXZ 93014-17-XXZ 93014-18-XXZ 93014-19-XXZ 93014-20-XXZ 93014-21-XXZ 93014-22-XXZ 93014-23-XXZ 93014-24-XXZ 93014-25-XXZ 93014-26-XXZ 93014-27-XXZ 93014-28-XXZ 93014-29-XXZ 93014-30-XXZ 93014-31-XXZ 93014-32-XXZ 93014-33-XXZ 93014-34-XXZ 93014-35-XXZ 93014-36-XXZ 93014
29、-37-XXZ - 301-002-01S-P15 301-003-01S-P15 301-004-01S-P15 301-005-01S-P15 301-006-01S-P15 301-007-01S-P15 301-008-01S-P15 301-009-01S-P15 301-010-01S-P15 301-011-01S-P15 301-012-01S-P15 301-013-01S-P15 301-014-01S-P15 301-015-01S-P15 301-016-01S-P15 301-017-01S-P15 301-018-01S-P15 301-019-01S-P15 30
30、1-020-01S-P15 301-021-01S-P15 301-022-01S-P15 301-023-01S-P15 301-024-01S-P15 301-025-01S-P15 301-026-01S-P15 301-027-01S-P15 301-028-01S-P15 301-029-01S-P15 301-030-01S-P15 301-031-01S-P15 301-032-01S-P15 301-033-01S-P15 301-034-01S-P15 - - - - 301-002-03S-P15 301-003-03S-P15 301-004-03S-P15 301-00
31、5-03S-P15 301-006-03S-P15 301-007-03S-P15 301-008-03S-P15 301-009-03S-P15 301-010-03S-P15 301-011-03S-P15 301-012-03S-P15 301-013-03S-P15 301-014-03S-P15 301-015-03S-P15 301-016-03S-P15 301-017-03S-P15 301-018-03S-P15 301-019-03S-P15 301-020-03S-P15 301-021-03S-P15 301-022-03S-P15 301-023-03S-P15 30
32、1-024-03S-P15 301-025-03S-P15 301-026-03S-P15 301-027-03S-P15 301-028-03S-P15 301-029-03S-P15 301-030-03S-P15 301-031-03S-P15 301-032-03S-P15 301-033-03S-P15 301-034-03S-P15 - - - - 301-002-01L-P15 301-003-01L-P15 301-004-01L-P15 301-005-01L-P15 301-006-01L-P15 301-007-01L-P15 301-008-01L-P15 301-00
33、9-01L-P15 301-010-01L-P15 301-011-01L-P15 301-012-01L-P15 301-013-01L-P15 301-014-01L-P15 301-015-01L-P15 301-016-01L-P15 301-017-01L-P15 301-018-01L-P15 301-019-01L-P15 301-020-01L-P15 301-021-01L-P15 301-022-01L-P15 301-023-01L-P15 301-024-01L-P15 301-025-01L-P15 301-026-01L-P15 301-027-01L-P15 30
34、1-028-01L-P15 301-029-01L-P15 301-030-01L-P15 301-031-01L-P15 301-032-01L-P15 301-033-01L-P15 301-034-01L-P15 - - - See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFENSE SUPPLY CENTER, C
35、OLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 8 Vendor PIN 1/ Vendor CAGE OEBT2 2/ Vendor CAGE 55322 PIN style (see table II) PIN style (see table II) DSCC drawing PIN Dash 06 Dash 01 through 06 93014-01-XXZ 93014-02-XXZ 93014-03-XXZ 93014-04-XXZ 93014-05-XXZ 93014-06-XXZ 93014-07-XXZ 93014-08-XXZ 93
36、014-09-XXZ 93014-10-XXZ 93014-11-XXZ 93014-12-XXZ 93014-13-XXZ 93014-14-XXZ 93014-15-XXZ 93014-16-XXZ 93014-17-XXZ 93014-18-XXZ 93014-19-XXZ 93014-20-XXZ 93014-21-XXZ 93014-22-XXZ 93014-23-XXZ 93014-24-XXZ 93014-25-XXZ 93014-26-XXZ 93014-27-XXZ 93014-28-XXZ 93014-29-XXZ 93014-30-XXZ 93014-31-XXZ 930
37、14-32-XXZ 93014-33-XXZ 93014-34-XXZ 93014-35-XXZ 93014-36-XXZ 93014-37-XXZ - 301-002-03L-P15 301-003-03L-P15 301-004-03L-P15 301-005-03L-P15 301-006-03L-P15 301-007-03L-P15 301-008-03L-P15 301-009-03L-P15 301-010-03L-P15 301-011-03L-P15 301-012-03L-P15 301-013-03L-P15 301-014-03L-P15 301-015-03L-P15
38、 301-016-03L-P15 301-017-03L-P15 301-018-03L-P15 301-019-03L-P15 301-020-03L-P15 301-021-03L-P15 301-022-03L-P15 301-023-03L-P15 301-024-03L-P15 301-025-03L-P15 301-026-03L-P15 301-027-03L-P15 301-028-03L-P15 301-029-03L-P15 301-030-03L-P15 301-031-03L-P15 301-032-03L-P15 301-033-03L-P15 301-034-03L
39、-P15 - - - SS-101-X-X-N SS-102-X-X-N SS-103-X-X-N SS-104-X-X-N SS-105-X-X-N SS-106-X-X-N SS-107-X-X-N SS-108-X-X-N SS-109-X-X-N SS-110-X-X-N SS-111-X-X-N SS-112-X-X-N SS-113-X-X-N SS-114-X-X-N SS-115-X-X-N SS-116-X-X-N SS-117-X-X-N SS-118-X-X-N SS-119-X-X-N SS-120-X-X-N SS-121-X-X-N SS-122-X-X-N SS-
40、123-X-X-N SS-124-X-X-N SS-125-X-X-N SS-126-X-X-N SS-127-X-X-N SS-128-X-X-N SS-129-X-X-N SS-130-X-X-N SS-131-X-X-N SS-132-X-X-N SS-133-X-X-N SS-134-X-X-N SS-135-X-X-N SS-136-X-X-N SS-137-X-X-N 1/ Caution. Do not use this number for item acquisition. Items acquired to this number may not satisfy the p
41、erformance requirements of this drawing. 2/ Vendor PIN covers “Blank” and “N” temperature ranges only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SIZE CAGE CODE DWG NO. 037Z3 93014 DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43216-5000 A REV A PAGE 9 Vender CAGE Vendor name number and address OEBT2 Andon Electronics Corporation 4 Court Drive Lincoln, RI 02865-4203 55322 Samtec, Inc. 520 Park East Blvd. New Albany, IN 47150-7251 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
