1、AMSC N/A FSC5910 MIL-C-62/2D 18 December 2008 SUPERSEDING MIL-C-62/2C 6 February 2004 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED) STYLES CE12 AND CE13 This specification sheet is approved for use by all Departments and Agencies of the Depar
2、tment of Defense. The requirements for acquiring the capacitors described herein shall consist of this document and the latest issue of specification MIL-C-62. STYLES CE12 - uninsulated CE13 - insulated NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only.
3、 3. Capacitors with a length of 1.625 inches (41.28 mm) or greater or a diameter of 0.750 inch (19.05 mm) or greater are not intended to be mounted by there leads. They shall be provided with a supplementary means of mounting such as a tangential bracket or wraparound bands. (Family 1 (see basic). 4
4、. The negative lead need not be offset. 5. Leads shall be .032 (.81 mm) .002 (.05 mm) (20 AWG) for units with a diameter of .625 (15.88 mm) or less and .040 (1.02 mm) .002 (.05 mm) (18 AWG) for units with a diameter greater than .625 (15.88 mm). Inches mm .125 3.18 .500 12.70 2.000 50.80 INCH POUND
5、INACTIVE FOR NEW DESIGN AFTER 1 JULY 1998Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 2 TABLE I. Styles CE12 and CE13 capacitors. Case dimensions 2/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximum impedance a
6、t 120 +10, -5 Hz at -40C +0C, -3C Dissipation factor .062 (1.57) .031 (.79) f Volts a Ohms Percent Inches Inches CE1-C181C 180 5 45 194 40 1.125 (28.58) .500 (12.70) CE1-C391C 390 5 66 90 40 1.625 (41.28) .500 (12.70) CE1-C471C 470 5 73 75 40 1.125 (28.58) .625 (15.88) CE1-C681C 680 5 87 52 40 2.125
7、 (53.98) .500 (12.70) CE1-C821C 820 5 96 43 40 1.125 (28.58) .750 (19.05) CE1-C122C 1200 5 116 29 40 1.125 (28.58) .875 (22.23) CE1-C152C 1500 5 130 23 40 1.625 (41.28) .750 (19.05) CE1-C182C 1800 5 142 19 40 2.625 (66.68) .625 (15.88) CE1-C332C 3300 5 193 8.5 40 1.625 (41.28) 1.000 (25.40) CE1-C472
8、C 4700 5 230 7.5 40 2.625 (66.68) .875 (22.23) CE1-C682C 6800 5 276 5 40 2.625 (66.68) 1.000 (25.40) CE1-C103C 10000 5 336 3.5 40 3.625 (92.08) 1.000 (25.40) CE1-C151D 150 10 58 187 35 1.125 (28.58) .500 (12.70) CE1-C301D 300 10 82 93 35 1.625 (41.28) .500 (12.70) CE1-C471D 470 10 104 60 35 2.125 (5
9、3.98) .500 (12.70) CE1-C681D 680 10 123 40 35 1.625 (41.28) .625 (15.88) CE1-C911D 910 10 143 31 35 2.125 (53.98) .625 (15.88) CE1-C102D 1000 10 150 28 35 2.125 (53.98) .750 (19.05) CE1-C152D 1500 10 183 19 35 2.125 (53.98) .750 (19.05) CE1-C222D 2200 10 222 13 35 1.625 (41.28) 1.000 (25.40) CE1-C33
10、2D 3300 10 272 9 35 2.125 (53.98) 1.000 (25.40) CE1-C472D 4700 10 325 6 35 2.625 (66.68) 1.000 (25.40) CE1-C682D 6800 10 390 4 35 3.625 (92.08) 1.000 (25.40) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 3
11、 TABLE I. Styles CE12 and CE13 capacitors - Continued. Case dimensions 2/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximum impedance at 120 +10, -5 Hz at -40C +0C, -3C Dissipation factor .062 (1.57) .031 (.79) f Volts a Ohms Percent Inches Inches CE1-C101E 100 15 58 280 30
12、1.125 (28.58) .500 (12.70) CE1-C221E 220 15 86 127 30 1.625 (41.28) .625 (15.88) CE1-C361E 360 15 110 78 30 2.125 (53.98) .500 (12.70) CE1-C511E 510 15 130 55 30 1.625 (41.28) .625 (15.88) CE1-C821E 820 15 166 34 30 1.625 (41.28) .750 (19.05) CE1-C102E 1000 15 183 28 30 2.125 (53.98) .750 (19.05) CE
13、1-C152E 1500 15 225 19 30 2.625 (66.68) .750 (19.05) CE1-C222E 2200 15 272 13 30 2.625 (66.68) .875 (22.23) CE1-C332E 3300 15 334 8.5 30 2.625 (66.68) 1.000 (25.40) CE1-C472E 4700 15 398 6.0 30 3.625 (92.08) 1.000 (25.40) CE1-C470F 47 25 51 314 25 1.125 (28.58) .500 (12.70) CE1-C101F 100 25 75 148 2
14、5 1.625 (41.28) .500 (12.70) CE1-C201F 200 25 106 74 25 2.125 (53.98) .500 (12.70) CE1-C271F 270 25 123 55 25 1.625 (41.28) .625 (15.88) CE1-C331F 330 25 136 45 25 1.125 (28.58) .875 (22.23) CE1-C391F 390 25 148 38 25 2.125 (53.98) .625 (15.88) CE1-C471F 470 25 162 31 25 1.625 (41.28) .750 (19.05) C
15、E1-C681F 680 25 195 22 25 2.125 (53.98) .750 (19.05) CE1-C102F 1000 25 237 15 25 2.125 (53.98) .875 (22.23) CE1-C152F 1500 25 291 10 25 3.125 (79.38) .875 (22.23) CE1-C222F 2200 25 352 7 25 3.125 (79.38) 1.000 (25.40) CE1-C272F 2700 25 390 5 25 3.625 (92.08) 1.000 (25.40) See footnotes at end of tab
16、le. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 4 TABLE I. Styles CE12 and CE13 capacitors - Continued. Case dimensions 2/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximum impedance at 120 +10, -5 Hz at -40C
17、+0C, -3C Dissipation factor .031 (.79) .016 (.41) f Volts a Ohms Percent Inches Inches CE1-C330G 33 50 61 450 20 1.125 (28.58) .500 (12.70) CE1-C680G 68 50 87 218 20 1.625 (41.28) .500 (12.70) CE1-C101G 100 50 106 148 20 2.125 (53.98) .500 (12.70) CE1-C151G 150 50 130 99 20 1.125 (28.58) .875 (22.23
18、) CE1-C201G 200 50 150 74 20 2.125 (53.98) .625 (15.88) CE1-C241G 240 50 165 62 20 2.625 (66.68) .625 (15.88) CE1-C331G 330 50 192 45 20 1.625 (41.28) .875 (22.23) CE1-C471G 470 50 229 31 20 2.625 (66.68) .750 (19.05) CE1-C511G 510 50 240 29 20 2.125 (53.98) .875 (22.23) CE1-C681G 680 50 276 22 20 2
19、.625 (66.68) .875 (22.23) CE1-C102G 1000 50 336 15 20 2.625 (66.68) 1.000 (25.40) CE1-C152G 1500 50 411 10 20 3.625 (92.08) 1.000 (25.40) CE1-C100H 10 100 48 880 15 1.125 (28.58) .500 (12.70) CE1-C180H 18 100 63 490 15 1.625 (41.28) .500 (12.70) CE1-C390H 39 100 93 226 15 1.625 (41.28) .625 (15.88)
20、CE1-C620H 62 100 117 142 15 2.125 (53.98) .625 (15.88) CE1-C101H 100 100 150 88 15 2.125 (53.98) .750 (19.05) CE1-C111H 110 100 158 80 15 2.625 (66.68) .750 (19.05) CE1-C151H 150 100 183 59 15 2.125 (53.98) .875 (22.23) CE1-C221H 220 100 225 40 15 3.125 (79.38) .875 (22.23) CE1-C331H 330 100 272 27
21、15 3.125 (79.38) 1.000 (25.40) CE1-C471H 470 100 325 19 15 3.625 (92.08) 1.000 (25.40) See footnotes at end of table Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 5 TABLE I. Styles CE12 and CE13 capacitors - Continued. Case dimensions 2
22、/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximum impedance at 120 +10, -5 Hz at -40C +0C, -3C Dissipation factor .031 (.79) .016 (.41) f Volts a Ohms Percent Inches Inches CE1-C5R1J 5.1 150 42 1720 12 1.125 (28.58) .500 (12.70) CE1-C100J 10 150 58 880 12 1.625 (41.28) .50
23、0 (12.70) CE1-C200J 20 150 82 440 12 2.125 (53.98) .500 (12.70) CE1-C270J 27 150 96 326 12 1.625 (41.28) .625 (15.88) CE1-C330J 33 150 105 266 12 1.125 (28.58) .875 (22.23) CE1-C390J 39 150 114 226 12 2.125 (53.98) .625 (15.88) CE1-C470J 47 150 126 187 12 1.625 (41.28) .750 (19.05) CE1-C680J 68 150
24、151 129 12 1.625 (41.28) .875 (22.23) CE1-C910J 91 150 175 97 12 2.625 (66.68) .750 (19.05) CE1-C101J 100 150 183 88 12 2.125 (53.98) .875 (22.23) CE1-C151J 150 150 225 59 12 3.125 (79.38) .875 (22.23) CE1-C271J 270 150 302 33 12 3.625 (92.08) 1.000 (25.40) CE1-C5R1K 5.1 200 51 1720 12 1.125 (28.58)
25、 .500 (12.70) CE1-C100K 10 200 67 880 12 1.625 (41.28) .500 (12.70) CE1-C150K 15 200 82 585 12 2.125 (53.98) .500 (12.70) CE1-C200K 20 200 95 440 12 1.625 (41.28) .625 (15.88) CE1-C300K 30 200 116 293 12 2.125 (53.98) .625 (15.88) CE1-C510K 51 200 150 172 12 2.125 (53.98) .750 (19.05) CE1-C750K 75 2
26、00 183 117 12 2.625 (66.68) .750 (19.05) CE1-C101K 100 200 211 88 12 2.625 (66.68) .875 (22.23) CE1-C151K 150 200 260 59 12 3.125 (79.38) .875 (22.23) CE1-C221K 220 200 314 40 12 3.625 (92.08) 1.000 (25.40) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking per
27、mitted without license from IHS-,-,-MIL-C-62/2D 6 TABLE I. Styles CE12 and CE13 capacitors - Continued. Case dimensions 2/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximum impedance at 120 +10, -5 Hz at -40C +0C, -3C Dissipation factor .031 (.79) .016 (.41) f Volts a Ohms P
28、ercent Inches Inches CE1-C100M 10 250 75 880 12 2.125 (53.98) .500 (12.70) CE1-C150M 15 250 92 585 12 1.625 (41.28) .625 (15.88) CE1-C200M 20 250 106 440 12 2.125 (53.98) .625 (15.88) CE1-C220M 22 250 111 400 12 1.625 (41.28) .750 (19.05) CE1-C390M 39 250 148 226 12 2.125 (53.98) .750 (19.05) CE1-C4
29、70M 47 250 164 187 12 2.625 (66.68) .750 (19.05) CE1-C620M 62 250 186 142 12 2.125 (53.98) .875 (22.23) CE1-C101M 100 250 237 88 12 3.125 (79.38) .875 (22.23) CE1-C151M 150 250 290 59 12 3.625 (92.08) 1.000 (25.40) CE1-C2R7N 2.7 300 43 3260 12 1.125 (28.58) .500 (12.70) CE1-C5R1N 5.1 300 58 1725 12
30、1.625 (41.28) .500 (12.70) CE1-C6R2N 6.2 300 64 1420 12 2.125 (53.98) .500 (12.70) CE1-C100N 10 300 82 880 12 1.625 (41.28) .625 (15.88) CE1-C200N 20 300 116 440 12 2.125 (53.98) .625 (15.88) CE1-C270N 27 300 135 326 12 2.625 (66.68) .625 (15.88) CE1-C360N 36 300 156 244 12 2.125 (53.98) .750 (19.05
31、) CE1-C470N 47 300 178 187 12 2.625 (66.68) .750 (19.05) CE1-C680N 68 300 214 129 12 2.625 (66.68) .875 (22.23) CE1-C101N 100 300 260 88 12 3.125 (79.38) 1.000 (25.40) CE1-C2R2P 2.2 350 41 4000 12 1.125 (28.58) .500 (12.70) CE1-C5R1P 5.1 350 63 1720 12 1.625 (41.28) .500 (12.70) CE1-C100P 10 350 88
32、880 12 1.625 (41.28) .625 (15.88) CE1-C150P 15 350 108 585 12 2.125 (53.98) .625 (15.88) CE1-C270P 27 350 145 326 12 2.125 (53.98) .750 (19.05) CE1-C390P 39 350 173 225 12 2.125 (53.98) .875 (22.23) CE1-C680P 68 350 232 129 12 2.625 (66.68) 1.000 (25.40) CE1-C111P 110 350 294 80 12 3.625 (92.08) 1.0
33、00 (25.40) See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 7 TABLE I. Styles CE12 and CE13 capacitors - Continued. Case dimensions 2/ 3/ A B Type designation 1/ Capacitance DC rated voltage DC leakage Maximu
34、m impedance at 120 +10, -5 Hz at -40C +0C, -3C Dissipation factor .031 (.79) .016 (.41) f Volts a Ohms Percent Inches Inches CE1-C2R0Q 2.0 400 42 7400 17 1.125 (28.58) .500 (12.70) CE1-C4R3Q 4.3 400 62 3440 17 1.625 (41.28) .500 (12.70) CE1-C8R2Q 8.2 400 86 1800 17 1.625 (41.28) .625 (15.88) CE1-C9R
35、1Q 9.1 400 90 1625 17 2.125 (53.98) .625 (15.88) CE1-C100Q 10 400 95 1480 17 1.125 (28.58) .875 (22.23) CE1-C150Q 15 400 116 986 17 2.625 (66.68) .625 (15.88) CE1-C200Q 20 400 133 740 17 2.125 (53.98) .750 (19.05) CE1-C240Q 24 400 147 616 17 2.625 (66.68) .750 (19.05) CE1-C390Q 39 400 187 380 17 2.6
36、25 (66.68) .875 (22.23) CE1-C470Q 47 400 203 314 17 3.125 (79.38) .875 (22.23) CE1-C680Q 68 400 248 218 17 3.125 (79.38) 1.000 (25.40) CE1-C820Q 82 400 271 180 17 3.625 (92.08) 1.000 (25.40) CE1-C1R0R 1.0 450 31 22000 17 1.125 (28.58) .500 (12.70) CE1-C3R0R 3.0 450 55 7330 17 1.625 (41.28) .500 (12.
37、70) CE1-C5R1R 5.1 450 72 4310 17 1.625 (41.28) .625 (15.88) CE1-C6R2R 6.2 450 79 3520 17 2.125 (53.98) .625 (15.88) CE1-C100R 10 450 100 2200 17 2.625 (66.68) .625 (15.88) CE1-C150R 15 450 123 1465 17 2.125 (53.98) .750 (19.05) CE1-C220R 22 450 149 1000 17 2.125 (53.98) .875 (22.23) CE1-C330R 33 450
38、 182 666 17 2.125 (53.98) 1.000 (25.40) CE1-C470R 47 450 217 468 17 2.625 (66.68) 1.000 (25.40) CE1-C680R 68 450 262 323 17 3.625 (92.08) 1.000 (25.40) 1/ Complete type designation shall include an additional digit to complete style. 2/ The dimensions shown are for style CE12; for style CE13, add .0
39、62 (1.57) .062 (1.57) to the nominal dimension. 3/ Metric equivalents are given for general information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 8 REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Case typ
40、e: Tubular, uninsulated (CE12) and insulated (CE13). Capacitance value: See table I. Capacitance tolerance: At 200 volts, dc rated, and above: -10, +50 percent. At 150 volts, dc rated, and less: -10, +75 percent. Operating temperature range: -40C to +85C. Solderability: Method 208 of MIL-STD-202. DC
41、 leakage: See table I. Capacitance: Method 305 of MIL-STD-202. Dissipation factor: See table I. Terminal strength: Method 211 of MIL-STD-202, test conditions A and D. Shock, medium impact: Method 205 of MIL-STD-202, test condition C. Vibration, high frequency: Method 204 of MIL-STD-202, test conditi
42、on B. Salt atmosphere (corrosion): Method 101 of MIL-STD-202, test condition B. Temperature cycling and immersion: Temperature cycling: Method 102 of MIL-STD-202, test condition D. Immersion: Method 104 of MIL-STD-202, test condition C. DWV - Insulating sleeves - Method 301 of MIL-STD-202. 4,000 vol
43、ts dc applied. DCL - Not more than 150 percent of initial measurement. Capacitance change - 5 percent. DF - See table I. Corrosion - Not more than 10 percent. Moisture resistance: Method 106 of MIL-STD-202. Insulation resistance (insulating sleeve) - Not less than 100 megohms. DWV - Insulating sleev
44、es - Method 301 of MIL-STD-202. 4,000 volts dc applied. DCL - Not more than 150 percent of initial requirement. Capacitance change - 5 percent. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 9 DF - See table I. Corrosion - Not more than
45、10 percent. Stability at low and high temperature: In accordance with MIL-C-62. Step 1 (at +25C): DCL - See table I. Capacitance - See table I. DF - See table I. Step 2 (at -40C): Impedance - See table I. Step 3 (at +25C): DCL - See table I. Capacitance - 5 percent of initial value. DF - See table I
46、. Step 4 (at +85C): DCL - Not more than 10 times initial value, or meet initial 25C requirement. Capacitance - 20 percent of initial value. DF - See table I. Step 5 (at +25C): DCL - See table I. Capacitance - 5 percent of initial value. DF - See table I. Surge voltage: In accordance with MIL-C-62. D
47、CL - See table I. Capacitance change - 6 percent. DF - See table I. Vent: Not applicable. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-62/2D 10 Life: Method 108 of MIL-STD-202, test condition F. DCL - See table I. Capacitance change: 100 vol
48、ts, dc rated, and less: -20, +15 percent. DC rated voltage above 100 volts: 15 percent. DF - Meet the initial requirement or not exceed 150 percent of the initial measurement. Barometric pressure: Method 105 of MIL-STD-202. Shelf life: In accordance with MIL-C-62. Build factor: Not more than 4.0. Shelf factor: Not more than 3.0. DCL: Not more than 150 percent of initial value. Capacitance change: 6 percent. DF: Not more than 175 percent of initial requirement. VERIFICATION: Qualification inspection: Not applicable. Retention of qualification: Not applicable. Confor
