DL 5190 5-2012 Technical specification for thermal power erection and construction - Part 5 Piping and system《电力建设施工技术规范 第5部分 管道及系统》.pdf

相关资源

DL T 880-2021 带电作业用导线软质遮蔽罩.pdf

DL T 887-2024 杆塔工频接地电阻测量方法.pdf

DL T 939-2024 火力发电厂锅炉受热面管监督技术标准.pdf

DL T 647-2024 电站锅炉压力容器检验规程.pdf

DL T 822-2024 水电厂计算机监控系统试验验收规程.pdf

DL T 838-2024 燃煤火力发电企业设备检修导则.pdf

DL T 849.4-2024 电力设备专用测试仪器通用技术条件 第4部分：超低频高压发生器.pdf

DL T 683-2024 电力金具型号命名方法.pdf

DL T 824-2023 汽轮机电液调节系统性能验收导则.pdf

DL T 895-2024 除灰除渣系统运行导则.pdf

猜你喜欢

DIN 21639-2016 Air regulation systems for mining - Travel-way air locks with pressure-relief air doors《采矿用风量调节系统 建设有减压风门的行车道气阀》.pdf

DIN 21640-1-1993 Air regulating systems in mining pneumatic cylinders for airdoors without pressure reduction dimensions requirement marking《采矿用空气调节系统 非减压风门用压缩气缸 尺寸、要求、标记》.pdf

DIN 2172-1-2013 Reamers - Part 1 Technical specifications for reamers with shank《铰刀 第1部分 带柄铰刀的技术规范》.pdf

DIN 2172-2-2007 Reamers - Part 2 Technical specifications for shell reamers《铰刀 第2部分 套形铰刀的技术规范》.pdf

DIN 2173-2008 Countersinks and counterbores tools with pilot and shank - Technical specifications《带导柱和柄的沉孔钻和沉孔扩孔钻刀具 技术规范》.pdf

DIN 2174-2008 Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0 25 to M52 × 4 - Dimensions《米制ISO粗螺距螺纹M2至M39和米制ISO细螺距螺纹M3×0 25至M.pdf

DIN 2175-1-2015 Cold-forming taps - Part 1 Technical delivery conditions for high-speed steel cold-forming taps《冷成型丝锥 第1部分 高速钢冷成型丝锥的技术交货条件》.pdf

DIN 2175-2-2015 Cold-forming taps - Part 2 Technical delivery conditions for carbide cold-forming taps《冷成型丝锥 第2部分 硬质合金冷成型丝锥的技术交货条件》.pdf

DIN 21772-2012 Gears - Cylindrical involute gears and gear pairs - Definition of deviations《齿轮 圆柱形渐开线齿轮和齿轮副 偏差定义》.pdf