DL T 5135-2013 Specifications of excavation blasting for hydropower and water resources projects《水电水利工程爆破施工技术规范》.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

JIS B6335-1986 数控外圆磨床和万能磨床性能和加工精度试验规程.pdf

JIS B6336-1-2000 Test conditions for machining centers-Part1：Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis).pdf

JIS B6336-2-2002 Test conditions for machining centres-Part 2：Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis).pdf

JIS B6336-3-2000 Test conditions for machining centers-Part 3：Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis).pdf

JIS B6336-4-2000 Test conditions for machining centers-Part 4：Accuracy and repeatability of positioning of linear and rotary axes.pdf

JIS B6336-5-2000 Test conditions for machining centers-Part 5：Accuracy and repeatability of positioning of work-holding pallets.pdf

JIS B6336-6-2000 Test conditions for machining centers-Part 6：Accuracy of feeds, speeds and interpolations.pdf

JIS B6336-7-2000 Test conditions for machining centers-Part 7：Accuracy of a finished test piece.pdf

JIS B6336-8-2000 Test conditions for machining centres-Part8：Evaluation of the contouring performance in the three coordinate planes.pdf