1、MSLb567 REV E 57 a 7779932 0000603 5 MS part No. National Stock Number MS16569-1 59 30-00-719-9659 FED. WP CLASS 5930 rMETAL PIN THROUGH ACTUATING HONOLE 8 NECK 1 / SEE NOTE7 * SQUIREbENTS: INTERHATIOHAL IHTEREST I22 1. 2. 3. 4. 5. 6. 7. a. 3 9. 3 10. OTES : 1. 2. TITLE Switch, Toggle, Double Pole,
2、MILITARY STANDARD Single Throw (For Use In Lighting Fixtures) MS165 69( S H) 1116-THK NUT OFF INDICATO3 RATE - CUREUEHT SPECIFICATIOH OVER BARRIERS SHEET SUPERSEDES: PlGlAiL I8 AW 6 UL APPROVE0 WML. EPD WIRE 3/4 INW STRIPPE0 ENDS-OPTION&L WN F LMIG E5. 1 OF 1 Switches shall be 3 ampere, 250 volt, do
3、uble pole, “on-off“ action. Material of the box shall be molded or laminated phenolic. Two switches for each 1,000 switches or fraction thereof furnished on each Government order and two switches for each 1,000 switches or fraction thereof purchased by shipbuilding contractors for installa- tions on
4、 ships shall be tested for 6,000 operations under rated load and voltage, and shall withstand this test without failure of any part thereof. Commercial tolerances acceptable. Screw-thread Handbook H28 applies. Fire Underwriters approval required. To increase safety, switch operating handle shall be
5、pinned to the neck of the switch by a metal pin in the approximate position shown. On watertight applications where boot is used the “on-off“ indicator plate cannot be used. Unless otherwise noted tolerances are + 1/32. This dimension may be increased to 11n6 when switches are used in new constructi
6、on lighting fixtures. The 1/2 dimension shall be main tained when switches are procured for stock or repair parts. For design feature purposes, this standard takes precedence over pro- Referenced documents shall be of the issue in effect on date of curement documents referenced herein. invitations for bid. *US. GOVERNMENT PRINTING OFFICE: 1978-7031222543 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
