1、 INCH-POUNDMS27232B 14 May 2007 SUPERSEDING MS27232A 22 September 2000 DETAIL SPECIFICATION SHEET STRAIGHT FLANGE ASSEMBLY ADAPTER, HOSE TO FLANGE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES This specification is approved for use by all Departments and Agencies of the Department of Defense. The require
2、ments for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-5070. FIGURE 1. Flange assembly dimensions and configuration. AMSC N/A FSC 4730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27232B 2 Flange P
3、IN (see note 3) Nipple PIN Socket PIN MS27232 dash number MS20756 MS27231 MS24590 (see note 4) -8 -8 -8 -8 -10 -10 -10 -10 -12 -12 -12 -12 MS24591 -16 -16 -16 -16 -20 -20 -20 -20 -24 -24 -24 -24 -32 -32 -32 -32 -40 -40 -40 -40 -48 -48 -48 -48 NOTES: 1. Dimensions are in inches. 2. Metric equivalents
4、 are for information only. 3. Part or Identifying Number (PIN). 4. Material aluminum only. FIGURE 1. Flange assembly dimensions and configuration - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and f
5、igure 1 in case of conflict between this drawing and MIL-DTL-5070, this drawing shall govern. Intended use. This assembly is designed for use only with hose in accordance with MIL-DTL-8794. This assembly is intended for use only in fuel and oil lines. Material: Aluminum: Aluminum shall be in accorda
6、nce with MIL-DTL-5070. Finish: Finish shall be in accordance with MIL-DTL-5070. Color identification: Color identification shall be in accordance with MIL-DTL-5070. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27232B 3 PIN example: MS 27232 -8 A
7、A Material/finish code, see table IDash number on figure 1 Basic specification number MS prefix TABLE I. Code for material and finish. Code Dash size Material/finish AA -8 through -48 Aluminum - anodic coating Identification of product. The PIN and the manufacturers Commercial and Government Entity
8、CAGE) Code or trademark shall be marked on a removable tag securely attached to the assembly. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to
9、MIL-DTL-5070, this document references the following: MS20756 MS24590 MS24591 MS27231 MIL-DTL-8794 CONCLUDING MATERIAL Custodians: Preparing activity:Army - AT DLA - CC Navy - AS Air Force - 99 (Project 4730-2005-051) DLA - CC Review activities: Army - AV Navy - MC, SA Air Force - 11, 71 NOTE: The a
10、ctivities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
