1、INCH-POUNDMS27595E 25 January 2006SUPERSEDING MS27595D 6 January 1978DETAIL SPECIFICATION SHEET RETAINER, PACKING BACKUP, CONTINUOUS RING, POLYTETRAFLUOROETHYLENE Inactive for new design after 18 July 1997This specification sheet is approved for use by all Departments and Agencies of the Department
2、of Defense. The requirements for acquiring the product described herein shall consist this specification sheet and SAE-AS8791. WM(ID)TFIGURE 1. RetainerAMSC N/A FSC 530 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27595E TABLE I. Retainer Part N
3、umber and Dimensions PART NO. M (ID) T W PART NO. M (ID) T W MS27595-004 .080 MS27595-129 1.565 MS27595-005 .111 MS27595-130 1.629 MS27595-006 .125 MS27595-131 1.691 MS27595-007 .156 MS27595-132 1.754 MS27595-008 .187 MS27595-133 1.816 MS27595-009 .219 MS27595-134 1.879 MS27595-010 .250 .001 .050 .0
4、55 MS27595-135 1.942 MS27595-011 .312 MS27595-136 2.004 MS27595-012 .375 .002 .001 MS27595-137 2.067 MS27595-013 .440 MS27595-138 2.129 .050 .088 MS27595-014 .503 MS27595-139 2.192 .002 MS27595-015 .565 MS27595-140 2.254 .002 .001 MS27595-016 .628 MS27595-141 2.317 MS27595-017 .690 MS27595-142 2.379
5、 MS27595-018 .753 MS27595-143 2.442 MS27595-019 .815 MS27595-144 2.504 MS27595-020 .881 MS27595-145 2.567 MS27595-021 .943 MS27595-146 2.629 MS27595-022 1.006 MS27595-147 1.692 MS27595-023 1.068 MS27595-148 2.754 MS27595-024 1.131 .002 MS27595-149 2.817 MS27595-025 1.193 MS27595-210 .753 MS27595-026
6、 1.256 MS27595-211 .815 MS27595-027 1.318 MS27595-212 .878 MS27595-028 1.381 MS27595-213 .940 .001 MS27595-110 .374 MS27595-214 1.003 MS27595-111 .437 MS27595-215 1.065 MS27595-112 .499 MS27595-216 1.128 MS27595-113 .562 MS27595-217 1.190 MS27595-114 .624 MS27595-218 1.253 MS27595-115 .687 .001 MS27
7、595-219 1.315 MS27595-116 .749 MS27595-220 1.378 MS27595-117 .815 MS27595-221 1.440 MS27595-118 .877 MS27595-222 1.503 .002 MS27595-119 .940 .050 .088 MS27595-223 1.629 .050 .119 MS27595-120 1.002 MS27595-224 1.754 MS27595-121 1.065 .002 .001 MS27595-225 1.880 MS27595-122 1.127 MS27595-226 2.005 .00
8、2 .001 MS27595-123 1.190 MS27595-227 2.130 MS27595-124 1.252 .002 MS27595-228 2.255 MS27595-125 1.315 MS27595-229 2.380 MS27595-126 1.377 MS27595-230 2.505 MS27595-127 1.440 MS27595-231 2.630 MS27595-128 1.502 MS27595-232 2.755 2 Provided by IHSNot for ResaleNo reproduction or networking permitted w
9、ithout license from IHS-,-,-MS27595E TABLE I. Retainer Part Number and Dimensions-continued PART NO. M (ID) T W PART NO. M (ID) T W MS27595-233 2.880 MS27595-347 4.248 MS27595-234 3.005 MS27595-348 4.373 MS27595-235 3.130 MS27595-349 4.498 .073 .002 .185.001MS27595-236 3.255 MS27595-425 4.502 MS2759
10、5-237 3.380 MS27595-426 4.627 MS27595-238 3.505 MS27595-427 4.752 MS27595-239 3.630 .002 .050 .119 MS27595-428 4.877 MS27595-240 3.755 .002 .001 MS27595-429 5.002 MS27595-241 3.880 MS27595-430 5.127 MS27595-242 4.005 MS27595-431 5.252 MS27595-243 4.130 MS27595-432 5.377 MS27595-244 4.255 MS27595-433
11、 5.502 .002 MS27595-245 4.380 MS27595-434 5.627 MS27595-246 4.505 MS27595-435 5.752 MS27595-247 4.630 MS27595-436 5.877 MS27595-325 1.497 MS27595-437 6.002 MS27595-326 1.622 MS27595-438 6.252 MS27595-327 1.748 MS27595-439 6.502 MS27595-328 1.873 MS27595-440 6.752 MS27595-329 1.998 MS27595-441 7.002
12、.108 .236 MS27595-330 2.123 MS27595-442 7.252 MS27595-331 2.248 MS27595-443 7.502 .002 .001MS27595-332 2.373 MS27595-444 7.752 MS27595-333 2.498 MS27595-445 8.002 MS27595-334 2.623 .073 .185 MS27595-446 8.502 MS27595-335 2.748 .002 MS27595-447 9.002 MS27595-336 2.873 .002 .001 MS27595-448 9.502 .003
13、 MS27595-337 2.998 MS27595-449 10.002 MS27595-338 3.123 MS27595-450 10.502 MS27595-339 3.248 MS27595-451 11.002 MS27595-340 3.373 MS27595-452 11.502 MS27595-341 3.498 MS27595-453 12.002 .004 MS27595-342 3.623 MS27595-454 12.502 MS27595-343 3.748 MS27595-455 13.002 MS27595-344 3.873 MS27595-456 13.50
14、2 MS27595-345 3.998 MS27595-457 14.002 MS27595-346 4.123 MS27595-458 14.502 .005 MS27595-459 15.002 MS27595-460 15.502 NOTES: 1. SURFACES MUST BE SMOOTH AND FREE FROM IRREGULARITIES. EDGES MUST BE CLEAN AND SHARP. 2. DIMENSIONS IN INCHES. 3. FOR USE IN PACKING GROOVES CONFORMING TO SPECIFICATION MIL
15、-G-5514, 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27595E EXCEPT NOT FOR USE IN O.D. (PISTON) APPLICATIONS USING MIL-G-5514 A & B GLANDS. 4. FOR SINGLE TURN RING (CUT) SEE MS28774. 5. FOR DESIGN FEATURE PURPOSES, THIS STANDARD TAKES PRECEDE
16、NCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. 6. CHANGES FROM PREVIOUS ISSUE. MARGINAL NOTATIONS ARE NOT USED IN THIS REVISION TO IDENTIFY CHANGES WITH RESPECT TO THE PREVIOUS ISSUE DUE TO THE EXTENT OF THE CHANGES. Custodians: Preparing activity: Army MR DLA IS Navy AS Air Force 99 (Project 533
17、0-2005-003) Review Activities: Army AV, MI Navy SA, SH NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
