1、I INCH-POUND I MS51520A AMENDMENT 2 9 April 1998 SUPERSEDING AMENDMENT 1 18 August 1994 MILITARY SPECIFICATION SHEET NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED This amendment forms a part of MS51520A, dated 17 January 1979, and is approved for use by all Departments and Agencies of the Department of D
2、efense. PAGE 1 * Note 11 (See Amendment 1): Delete and replace with the following: “1 1. MS51520A parts shall not be supplied with the undercut, as defined by dimensions G1 and HI on the bulkhead end of the fitting.” Parts.manufactured prior to the date of this amendment are acceptable for use until
3、 exhausted. NOTE: The margins of this amendment are marked with asterisks to indicate where changes from the previous amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cauti
4、oned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. Custodians: Army - AR Navy - OS Preparing Activity: DM - CC (Project 4730-0834) Review Activities: Army - AT, CR4 Navy - MC, YD-1 AMSC NIA I of I FSC 4730 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
