1、BSI Standards PublicationBS EN 1672-1:2014Food processing machinery Basic conceptsPart 1: Safety requirementsBS EN 1672-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1672-1:2014.The UK participation in its preparation was entrusted to TechnicalCommittee
2、 MCE/3/5, Food industry machines.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institutio
3、n 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 78118 6ICS 67.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments issued sin
4、ce publicationDate Text affectedBS EN 1672-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1672-1 October 2014 ICS 67.260 English Version Food processing machinery - Basic concepts - Part 1: Safety requirements Machines pour les produits alimentaires - Notions fondamentales - Partie 1: Pr
5、escriptions relatives la scurit Nahrungsmittelmaschinen - Allgemeine Gestaltungsleitstze - Teil 1: Sicherheitsanforderungen This European Standard was approved by CEN on 9 August 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
6、 this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three offici
7、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of A
8、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw
9、eden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for
10、CEN national Members. Ref. No. EN 1672-1:2014 EBS EN 1672-1:2014EN 1672-1:2014 (E) 2 Contents Page Foreword 5 Introduction 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions 9 4 List of significant hazards . 10 4.1 General 10 4.2 Mechanical hazards 11 4.2.1 Moving parts . 11 4.2.2 Haza
11、rds caused by high pressure fluids . 12 4.2.3 Stored energy 13 4.2.4 Slip, trip and fall hazards resulting from the design of the machine 13 4.2.5 Loss of stability 13 4.3 Electrical Hazards . 13 4.3.1 Electrical equipment 13 4.3.2 Electrostatic phenomena . 14 4.4 Thermal hazards . 14 4.5 Noise 14 4
12、.6 Hazards generated by vibration 14 4.7 Hazards generated by radiation 14 4.8 Hazards generated by materials and substances . 15 4.8.1 Food products . 15 4.8.2 Hazards from cleaning media 15 4.8.3 Hazards from operating machines in potentially explosive atmospheres . 16 4.9 Hazards generated by neg
13、lecting ergonomic principles in machine design . 16 4.9.1 General 16 4.9.2 Human error 17 4.10 Hazards due to position, identification and operation of controls 17 4.10.1 General 17 4.10.2 Inability to stop movement 17 4.10.3 Failure to isolate . 17 4.11 Hazards caused by failures on the machine 17
14、4.12 Hazards due to missing or wrongly adjusted guards and protective devices . 18 4.13 Hazards due to the linking of machines and processes 18 4.14 Hazards created by common mechanisms on food processing machines . 18 4.14.1 Feed hoppers 18 4.14.2 Cutting devices . 19 4.14.3 Conveyors . 19 5 Safety
15、 requirements and protective measures . 20 5.1 General 20 5.2 Requirements to eliminate mechanical hazards . 20 5.2.1 Safeguarding of moving parts . 20 5.2.2 Safety requirements for hygienic design features 21 5.2.3 Safety requirements for high pressure fluids 23 5.2.4 Stored energy 23 5.2.5 Require
16、ments to prevent slip, trip and falling hazards 23 5.2.6 Stability of machines 24 BS EN 1672-1:2014EN 1672-1:2014 (E) 3 5.3 Requirements to prevent electrical hazards . 25 5.3.1 Electrical equipment . 25 5.3.2 Electrostatic phenomena 27 5.4 Thermal hazards 27 5.5 Noise reduction . 27 5.6 Vibration .
17、 28 5.7 Radiation 28 5.8 Food products, materials and substances . 28 5.8.1 Food products . 28 5.8.2 Cleaning media 29 5.8.3 Requirements for machines used in potentially explosive atmospheres . 29 5.9 Ergonomic design principles . 30 5.9.1 General . 30 5.9.2 Operating the machine . 30 5.9.3 Loading
18、 product into the feed hopper 30 5.9.4 Cleaning the machine . 30 5.9.5 Maintenance . 30 5.9.6 Moving the machine 30 5.10 Controls 30 5.10.1 General . 30 5.10.2 Stop Function 30 5.10.3 Emergency stop devices on large machines . 31 5.10.4 Means of isolation of energy supplies 31 5.11 Requirements to p
19、revent failures 31 5.12 Requirements to prevent hazards due to missing or wrongly adjusted guards and protective devices . 32 5.13 Requirements for machines and processes that are linked together . 33 5.14 Requirements for common mechanisms on food processing machines . 33 5.14.1 Safety requirements
20、 for feed hoppers 33 5.14.2 Cutting devices 38 5.14.3 Conveyors 38 6 Verification . 39 6.1 Introduction 39 6.2 Visual inspections . 40 6.2.1 Mechanical parts . 40 6.2.2 Guards 40 6.3 Functional tests . 40 6.3.1 Interlocking and protective devices 40 6.3.2 Stopping functions 40 6.4 Measurements . 40
21、6.4.1 Measurements with machine stopped 40 6.4.2 Measurements with machine running . 41 6.5 Design verification 41 6.5.1 Guards 41 6.5.2 Pneumatic systems . 41 6.5.3 Hydraulic systems . 41 6.5.4 Electrical equipment . 41 6.6 Hazardous-product- and cleaning-media-related requirements 41 7 Information
22、 for use 41 7.1 General . 41 7.2 Signal and warning devices . 41 7.3 Accompanying documents 42 7.4 Marking . 43 Annex A (normative) Noise measurement . 45 A.1 Scope 45 BS EN 1672-1:2014EN 1672-1:2014 (E) 4 A.2 Terms and definitions 45 A.3 Determination of emission sound pressure level . 45 A.4 Sound
23、 power level determination . 45 A.5 Installation and mounting conditions 46 A.6 Operating conditions . 46 A.7 Measurement uncertainties . 46 A.8 Information to be recorded 47 A.9 Information to be reported . 47 A.10 Declaration and verification of noise emission values 47 Annex B (normative) Alterna
24、tive methods of safeguarding medium-sized openings in guards 49 Annex C (normative) Relationship to machine-specific food processing machine standards . 50 Bibliography . 52 BS EN 1672-1:2014EN 1672-1:2014 (E) 5 Foreword This document (EN 1672-1:2014) has been prepared by Technical Committee CEN/TC
25、153 “Machinery intended for use with foodstuffs and feed”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015 and conflicting national standards sh
26、all be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Re
27、gulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
28、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1672-1:2014EN 1672-1:2014 (E) 6 Introduction Food processing machines are used extensively in Europe, in domestic, cateri
29、ng and industrial applications. They present many health and safety hazards and have the potential to cause serious injury. At the time of publication of this European Standard there exist about 50 European C-standards for all kinds of food processing machinery. Yet, some food processing machines ar
30、e so specific and their variety is so large that it is not possible to sufficiently cover all types by machine-specific standards. EN 1672-1 therefore addresses those food processing machines that are not covered by one of the machine-specific standards that are listed in Annex C. The extent to whic
31、h hazards are covered by this document is indicated in the Scope and Clause 4. BS EN 1672-1:2014EN 1672-1:2014 (E) 7 1 Scope This European Standard deals with the significant hazards, hazardous situations and events relevant to commercial and industrial food processing machines as defined in Clause
32、3 when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the significant hazards, hazardous situations and events that occur during transport, assembly and installation, commissioning, setti
33、ng, teaching, programming, process changeover, operation, cleaning, fault finding and maintenance. This European Standard deals with those risks which occur commonly in food processing machines and for which common technical requirements can be set which can be applied at all (or most) machines whic
34、h have that particular hazard. Exclusions: This European Standard is not applicable to the following machines: food processing machines intended for domestic use; food processing machines covered by the machine-specific standards listed in Annex C; packaging machines; machines used in the agricultur
35、al and animal rearing sectors. This European Standard does not deal with the hygiene risks to the consumer of the food product handled in the food processing machine. These risks are dealt with in EN 1672-2:2005+A1:2009. This European Standard is not applicable to food processing machines that were
36、manufactured before the date of its publication as a European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated refere
37、nces, the latest edition of the referenced document (including any amendments) applies. EN 574:1996+A1:2008, Safety of machinery Two-hand control devices Functional aspects Principles for design EN 614-1, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 6
38、19:2002+A1:2010, Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads EN 620:2002+A1:2010, Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials EN 626-1:1994+A1:2008, Saf
39、ety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers BS EN 1672-1:2014EN 1672-1:2014 (E) 8 EN 894-1:1997+A1:2008, Safety of machinery Ergonomics requirements for the design of displays and contr
40、ol actuators Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3:2000+A1:2008, Safety of machinery Ergonomics requirements f
41、or the design of displays and control actuators Part 3: Control actuators EN 953:1997+A1:2009, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 60204-1:2006, Safe
42、ty of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989) EN 61310-1:2008, Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, ac
43、oustic and tactile signals (IEC 61310-1:2007) EN 61310-3:2008, Safety of machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007) EN 61496-1:2013, Safety of machinery Electro-sensitive protective equipment Part 1: General require
44、ments and tests (IEC 61496-1:2012) EN ISO 3744:2010, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 4413:2010, Hydraulic fluid power General r
45、ules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery
46、and equipment (ISO 4871:1996) EN ISO 7010:2012, Graphical symbols Safety colours and safety signs Registered safety signs (ISO 7010:2011) EN ISO 11201:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified pos
47、itions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 11202:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying app
48、roximate environmental corrections (ISO 11202:2010) EN ISO 11204:2010, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) BS EN 1672-1:2014E
49、N 1672-1:2014 (E) 9 EN ISO 12001:2009, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code (ISO 12001:1996) EN ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13732-3:2008, Ergon
