1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 2240-082:2011Aerospace series Lamps,incandescentPart 082: Lamp, code 7079 ProductstandardBS EN 2240-082:2011 BRITISH STANDARDNational forewordThis British Standard is the U
2、K implementation of EN 2240-082:2011.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not pu
3、rport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 74288 0ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandard
4、s Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate Text affectedBS EN 2240-082:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2240-082 July 2011 ICS 49.060 English Version Aerospace series - Lamps, incandescent - Part 082: Lamp, code 7079 - Product st
5、andard Srie arospatiale - Lampes incandescence - Partie 082 : Lampe, code 7079 - Norme de produit Luft- und Raumfahrt - Glhlampen - Teil 082: Lampe, Kode 7079 - Produktnorm This European Standard was approved by CEN on 28 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regu
6、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN memb
7、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C
8、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
9、 Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation
10、al Members. Ref. No. EN 2240-082:2011: EBS EN 2240-082:2011EN 2240-082:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Required characteristics .44 Designation 65 Marking .66 Technical specification .6BS EN 2240-082:2011EN 2240-082:2011 (E) 3 Foreword This document (EN 2240-082
11、:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services
12、of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withdrawn at the latest
13、by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national stand
14、ards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, P
15、oland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2240-082:2011EN 2240-082:2011 (E) 4 1 Scope This European Standard specifies the required characteristics for lamp, code 7079, for aerospace applications. It shall be used together with EN 2756. 2
16、Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2240-001, Aerospace serie
17、s Lamps, incandescent Part 001: Technical specification EN 2240-002, Aerospace series Lamps, incandescent Part 002: Main characteristics EN 2241, Aerospace series Lamp caps Dimensions EN 2756, Aerospace series Lamps, incandescent Test methods 3 Required characteristics 3.1 Dimensions and mass See Fi
18、gure 1 and Table 1. Dimensions in millimetres. Key 1 Reflector axis 2 Reflective area 3 Light centre Figure 1 BS EN 2240-082:2011EN 2240-082:2011 (E) 5 Table 1 Bulb appearance Silvered Nominal voltage V 28 Nominal current A 1,43 Nominal power W 40 Luminous intensity cd See below. Colour temperature
19、K 2 780 LifeStatic with d.c. h 150 Dynamic with d.c. h Static with a.c. h Reduced voltage V Luminous flux at reduced voltage lm Form of filament CC - 6 Light Centre Length (LCL) 31,8 1 Mass (for 1 000) kg 12 Light distribution Luminous intensity 4 000 cd min. on reflector axis. Horizontal and vertic
20、al beam spread to 400 cd points 25 min. 3.2 Other characteristics See Table 1. 3.3 Form of filament See EN 2240-002. 3.4 Cap BAY15s/19: see EN 2241. BS EN 2240-082:2011EN 2240-082:2011 (E) 6 4 Designation EXAMPLE Description block LAMP, INCANDESCENT Identity block EN2240-7079 Number of the basic sta
21、ndard Code (see EN 2240-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 5 Marking Unless there is not enough space, the lamp and its packaging shall be marked with the international code number such as indicated in EN 2240-002. 6 Technical
22、 specification See EN 2240-001. This page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is in
23、corporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they pos
24、sess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identi
25、ty of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email
26、: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001
27、Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standar
28、ds through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to da
29、te with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via Britis
30、hStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patent
31、s Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email:
