1、Cables, electrical, aircraft use Test methods Part 4 1 O: Thermal endurance The European Standard EN 3475-410:2002 has the status ofa British Standard ICs 49.060 BS EN 3475410:2002 % .A% NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW $x- - present to the responsible European
2、committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this subcommittee can be obtained on request to its secretary. C
3、r oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards
4、Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages Th
5、is document comprises a front cover, an inside front cover, the EN title page, pages 2 and 3 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 05 February 2002 ISBN O 580 38384 9 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
6、 3475-410 January 2002 ICs 49.060 English version Aerospace series - Cables, electrical, aircraft use - Test methods - Part 41 O: Thermal endurance Srie arospatiale - Cbles lectriques usage aronautique - Mthodes dessai - Partie 410: Endurance thermique Luft- und Raumfahrt - Elektrische Leitungen fr
7、Luftfahrt, Verwendung - Prfverfahren -Teil 410: Thermische Gebrauchsdauer This European Standard was approved by CEN on 6 August 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national sta
8、ndard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other la
9、nguage made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
10、Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights
11、of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-410:2002 E EN 3475-410:2002 (E) Foreword This document (EN 3475-41 0:2002) has been prepared by the European Association of Aerospace Manufacturers (AECMA). After enquiries and votes carried ou
12、t in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN This European Standard shall be given the status of a national standard, either by pub
13、lication of an identical text or by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by July 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this
14、 European Standard : Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 2 EN 3475-410:2002 (E) 1 Scope This standard specifies a method of measuring
15、 the thermal endurance of a finished cable. It shall be used together with EN 3475-100 and ASTM-D-3032-86 paragraph 14 - Thermal endurance. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cite
16、d at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition
17、 of the publication referred to applies. EN 3475-100 Aerospace series - Cables, electrical, aircraft use -Test methods - Part 100: General ASTM-D-3032-86 Standard methods of testing hook-up wire insulation 1) 3 Method In accordance with paragraph 14 of ASTM-D-3032-86. 4 Req ui rements The lifetime a
18、nd temperature shall be given in the product standard. 1) This standard is published by: American Society for Testing and Materials (ASTM), 1916 Race St., Philadelphia PA 19103 3 BS EN 3475-4 10:2002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible for prepa
19、ring British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or edit
20、ions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the in
21、side front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publicat
22、ions should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that
23、have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are a
24、lso available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price o
25、f standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information
26、about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract
27、 may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details such as symb
28、ols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.
