1、BRITISH STANDARDBS EN 3840:2007Aerospace series Paints and varnishes Technical specificationThe European Standard EN 3840:2007 has the status of a British StandardICS 49.040g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g5
2、1g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3840:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007 BSI 2007ISBN 978 0 580 54529 0National forewordThis British Standard is the UK implementati
3、on of EN 3840:2007.The UK participation in its preparation was entrusted by Technical Committee ACE/65, Non-metallic materials for aerospace purposes (excluding textiles), to Panel ACE/65/-/3, Paints.A list of organizations represented on this committee can be obtained on request to its secretary.Th
4、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EU
5、ROPENNEEUROPISCHE NORMEN 3840July 2007ICS 49.040English VersionAerospace series - Paints and varnishes - TechnicalspecificationSrie arospatiale - Peintures et vernis - SpcificationtechniqueLuft- und Raumfahrt - Beschichtungsstoffe - TechnischeLieferbedingungenThis European Standard was approved by C
6、EN on 13 April 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards ma
7、y be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN
8、 Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
9、Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form
10、 and by any means reservedworldwide for CEN national Members.Ref. No. EN 3840:2007: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .7 4 Requirements.8 5 Quality assurance9 6 Batch release testing.11 7 Packaging and labelling12 Annex A (normative) Test method.13
11、 Annex B (normative) Qualification requirements for colour and gloss 15 Annex C (informative) Certificate of conformity 2.1/Acceptance test certificate 3.1 B according to EN 10204 for paints and varnishes 16 EN 3840:20073 Foreword This document (EN 3840:2007) has been prepared by the Aerospace and D
12、efence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its pr
13、esentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the poss
14、ibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries a
15、re bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
16、den, Switzerland and the United Kingdom. EN 3840:20074 1 Scope This standard defines the technical requirements for the qualification, manufacture, inspection and the delivery of paints and varnishes for use in aerospace applications. It shall be applied in conjunction with the EN material specifica
17、tion. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3847, Aerospace s
18、eries Paints and varnishes Determination of sedimentation rating. 1)EN 4158, Aerospace series Paints and varnishes Test method for measurement of electrical surface resistance of conductive layers. EN 4159, Aerospace series Paints and varnishes Determination of resistance to microbial growth. 1)EN 4
19、160, Aerospace series Non-metallic materials Paints and varnishes Test methods Determination of the effect of thermal exposure. 1)EN 4170, Aerospace series Paints and varnishes Test method for measurement of resistance to cold crack temperature cycle. 1)EN 4171, Aerospace series Paints and varnishes
20、 Test method for determination of phosphoric acid index. 1)EN 4195, Aerospace series Paints and varnishes Test method for determination of chromate leaching. 1)EN 4508, Aerospace series Paints and varnishes Test method for anti slip coatings Determination of the sliding friction behaviour. EN 4592,
21、Aerospace series Paints and varnishes Test method for determination of infrared reflectance. EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (base
22、d on ISO 9001:1994). EN 10204, Metallic products Types of inspection documents. EN 23270, Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing (ISO 3270:1984). EN 29117, Paints and varnishes Determination of through-dry state and through-dry time Meth
23、od of test (ISO 9117:1990). EN ISO 1513, Paints and varnishes Examination and preparation of samples for testing (ISO 1513:1992). 1) Published as ASD Prestandard at the date of publication of this standard. EN 3840:20075 EN ISO 1517, Paints and varnishes Surface-drying test Ballotini method (ISO 151
24、7:1973). EN ISO 1518, Paints and varnishes Scratch test (ISO 1518:1992). EN ISO 1519, Paints and varnishes Bend test (cylindrical mandrel) (ISO 1519:2002). EN ISO 1520, Paints and varnishes Cupping test (ISO 1520:1999). EN ISO 1524, Paints, varnishes and printing inks Determination of fineness of gr
25、ind (ISO 1524:2000). EN ISO 2114, Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value (ISO 2114:2000). EN ISO 2409, Paints and varnishes Cross-cut test (ISO 2409:1992). EN ISO 2431, Paints and varnishes Determination of flow time by
26、 use of flow cups (ISO 2431:1993, including Technical Corrigendum 1:1994). EN ISO 2808, Paints and varnishes Determination of film thickness (ISO 2808:1997). EN ISO 2810, Paints and varnishes Natural weathering of coatings Exposure and assessment (ISO 2810:2004). EN ISO 2811-1, Paints and varnishes
27、Determination of density Part 1: Pyknometer method (ISO 2811-1:1997). EN ISO 2811-2, Paints and varnishes Determination of density Part 2: Immersed body (plummet) method (ISO 2811-2:1997). EN ISO 2811-3, Paints and varnishes Determination of density Part 3: Oscillation method (ISO 2811-3:1997). EN I
28、SO 2811-4, Paints and varnishes Determination of density Part 4: Pressure cup method (ISO 2811-4:1997). EN ISO 2812-1, Paints and varnishes Determination of resistance to liquids Part 1: General methods (ISO 2812-1:1993). EN ISO 2812-2, Paints and varnishes Determination of resistance to liquids Par
29、t 2: Water immersion method (ISO 2812-2:1993). EN ISO 2813, Paints and varnishes Determination of specular gloss of non-metallic paint films at 20, 60 and 85 (ISO 2813:1994, including Technical Corrigendum 1:1997). EN ISO 3001, Plastics Epoxy compounds Determination of epoxy equivalent (ISO 3001:199
30、9). EN ISO 3251, Paints, varnishes and plastics Determination of non-volatile matter content (ISO 3251:2003). EN ISO 3668, Paints and varnishes Visual comparison of the colour of paints (ISO 3668:1998). EN ISO 3675, Crude petroleum and liquid petroleum products Laboratory determination of density Hy
31、drometer method (ISO 3675:1998). EN ISO 3678, Paints and varnishes Print-free test (ISO 3678:1976). EN ISO 3679, Determination of flash point Rapid equilibrium closed cup method (ISO 3679:2004). EN ISO 3680, Determination of flash/no flash Rapid equilibrium closed cup method (ISO 3680:2004). EN 3840
32、:20076 EN ISO 4617, Paints and varnishes List of equivalent terms (ISO 4617:2000). EN ISO 4618, Paints and varnishes Terms and definitions (ISO/DIS 4618:2004). EN ISO 4623-1, Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates (ISO 4623-1:2000). EN ISO 462
33、3-2, Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates (ISO 4623-2:2003). EN ISO 4629, Binders for paints and varnishes Determination of hydroxyl value Titrimetric method (ISO 4629:1996). EN ISO 6270-1, Paints and varnishes Determination of resistanc
34、e to humidity Part 1: Continuous condensation (ISO 6270-1:1998). EN ISO 6272-1, Paints and varnishes Rapid-deformation (impact resistance) tests Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2002). EN ISO 7253, Paints and varnishes Determination of resistance to neutral salt spray (fo
35、g) (ISO 7253:1996). EN ISO 9001, Quality management systems Requirements (ISO 9001:2000). EN ISO 9514, Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing (ISO 9514:1992). EN ISO 9702, Plastics Amine
36、epoxide hardeners Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996). EN ISO 11341, Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation (ISO 11341:2004). EN ISO 11507, Paints and varnishes
37、 Exposure of coatings to artificial weathering Exposure to fluorescent UV and water (ISO 11507:1997). EN ISO 11890-1, Paints and varnishes Determination of volatile organic compound (VOC) content Part 1: Difference method (ISO 11890-1:2000). EN ISO 11890-2, Paints and varnishes Determination of vola
38、tile organic compound (VOC) content Part 2: Gas-chromatographic method (ISO 11890-2:2000). EN ISO 11909, Binders for paints and varnishes Polyisocyanate resins General methods of test (ISO 11909:1996). EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes Sampling (ISO 15528:200
39、0). ISO 760, Determination of water Karl Fischer method (General method). ISO 2718, Standard layout for a method of chemical analysis by gas chromatography. ISO 2884-1, Paints and varnishes Determination of viscosity using rotary viscometers Part 1: Cone-and-plate viscometer operated at a high rate
40、of shear. ISO 3233, Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of dried coating. ISO 5661, Petroleum products Hydrocarbon liquids Determination of refractive index. EN 3840:20077 ISO 6286, Molecular absorption spectrometry Vocabulary Gener
41、al Apparatus. ISO 6504-1, Paints and varnishes Determination of hiding power Part 1: Kubelka-Munk method for white and light-coloured paints. ISO 6504-3, Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate. ISO
42、 7724-1, Paints and varnishes Colorimetry Part 1: Principles. ISO 7724-2, Paints and varnishes Colorimetry Part 2: Colour measurement. ISO 7724-3, Paints and varnishes Colorimetry Part 3: Calculation of colour differences. ISO 7784-2, Paints and varnishes Determination of resistance to abrasion Part
43、 2: Rotating abrasive rubber wheel method. ISO 14680-1, Paints and varnishes Determination of pigment content Part 1: Centrifuge method. ISO 14680-2, Paints and varnishes Determination of pigment content Part 2: Ashing method. ISO 14680-3, Paints and varnishes Determination of pigment content Part 3
44、: Filtration method. ISO 15710, Paints and varnishes Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution. ISO 15716, Binders for paints and varnishes Determination of storage stability. TR 7000-9, Aerospace series Non-metallic materials Rules for the draf
45、ting and presentation of material standards Part 9: Paints and varnishes. 2)ASTM D 2370, Standard test method for tensile properties of organic coatings. 3)DIN 6175-1, Tolerances for automotive paints Uni paints. 3 Terms and definitions For the purposes of this standard, the terms and definitions gi
46、ven in EN 9100, EN ISO 4617, EN ISO 4618 and EN ISO 9001 as well as the following terms and definitions apply. 3.1 product in this and associated documents, the word product refers to all forms of paints and varnishes 3.2 production batch a production batch is a quantity of one product of determined
47、 composition produced in a single or continuous run to a defined manufacturing schedule 2) Published as ASD Technical Report at the date of publication of this standard. 3) Published by: ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA. EN 3840:20078 3.3
48、manufacturing schedule a manufacturing schedule is a document prepared by the manufacturer in accordance with EN ISO 9001 and/or EN 9100, which defines the actual manufacturing procedure and inspection verification stages to be followed in the production of a product/part to ensure that: the product
49、/part is produced in a controlled and consistent manner; special properties and/or function in service are reproducible; the product/part fulfils the requirements of the technical specification and material specification. 4 Requirements 4.1 General requirements 4.1.1 Manufacturing schedule The product shall be manufacture
