1、BRITISH STANDARDBS EN 860:2007Safety of woodworking machines One side thickness planing machinesICS 79.120.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3
2、g47g36g58+A1:2009BS EN +A2:2012National forewordThis British Standard is the UK implementation of EN 860:2007+A1:2009. It supersedes BS EN 860:2007 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN tex
3、t carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can be obtained on request to its
4、secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 860:2007+A1:2009This British Standard was published under the
5、 authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 January 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62127 7National forewordThis British Standard is the UK implementation of EN 860:2007+A1
6、:2009. It supersedes BS EN 860:2007 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK
7、 participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are re
8、sponsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 860:2007+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2010Amendments/corrigenda issued s
9、ince publicationDate Comments 31 January 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62127 7This British Standard is the UK implementation of EN 860:2007+A1:2009. It supersedes BS EN 860:2007 which is withdrawn. The start and finish of text introduced or altered by amendment is indica
10、ted in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee MTE/23, Woodworking machines.A list of organizations represe
11、nted on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 860:
12、2007+A1:2009This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2010Amendments/corrigenda issued since publication31 January 2010 Implementation of CEN amendment A1:2009ISBN 978 0 580 62127 7BS EN 860:2007+A2:2012ISBN 978 0 580 7
13、6102 7Amendments/corrigenda issued since publicationDate Comments31 January 2010 Implementation of CEN amendment A1:200931 July 2012 Implementation of CEN amendment A2:2012This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 The Briti
14、sh Standards Institution 2012. Published by BSI Standards Limited 2012This British Standard is the UK implementation of EN 860:2007+A2:2012. It supersedes BS EN 860:2007+A1:2009, which is withdrawn.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 860:2007+A2 June 2012 ICS 79.120.10 Supersedes EN
15、 860:2007+A1:2009English Version Safety of woodworking machines - One side thickness planing machines Scurit des machines pour le travail du bois - Machines raboter sur une face Sicherheit von Holzbearbeitungsmaschinen - Dickenhobelmaschinen fr einseitige Bearbeitung This European Standard was appro
16、ved by CEN on 10 May 2007 and includes Amendment 1 approved by CEN on 16 July 2009 and Amendment 2 approved by CEN on 20 May 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand
17、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an
18、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu
19、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EU
20、ROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 860:2007+A2:2012: EEN 860:2007+A2:2012 (E) 2 Contents Page Foreword 4In
21、troduction .51 Scope 62 Normative references 63 Terms and definitions .83.1 General 83.2 Definitions 83.3 Terms . 114 List of significant hazards . 125 Safety requirements and/or measures . 155.1 General . 155.2 Controls . 155.2.1 Safety and reliability of control systems 155.2.2 Position of control
22、s 165.2.3 Starting 165.2.4 Normal stopping . 175.2.5 Emergency stop 175.2.6 Failure of the power supply . 185.2.7 Failure of the control circuit 185.3 Protection against mechanical hazards . 195.3.1 Stability 195.3.2 Hazard of break up during operation 195.3.3 Cutterblock design . 195.3.4 Braking .
23、195.3.5 Devices to minimise the possibility or the effect of ejection . 205.3.6 Work-piece support and guides 215.3.7 Prevention of access to moving parts 225.3.8 Characteristics of #cutterblock$ guards . 235.4 Protection against non-mechanical hazards . 235.4.1 Fire . 235.4.2 Noise 235.4.3 Emission
24、 of chips and dust . 245.4.4 Electricity . 255.4.5 Ergonomics and handling 265.4.6 Pneumatics 275.4.7 Hydraulics 275.4.8 Electromagnetic compatibility . 275.4.9 Supply disconnection (isolation) 275.4.10 Static electricity 285.4.11 Maintenance 286 Information for use . 286.1 General . 286.2 Marking 2
25、86.3 Instruction handbook . 29Annex A (normative) Kickback test 33Annex B (normative) Stability test for displaceable machines . 34Annex C (normative) Impact test method for guards . 35BS EN 860:2007+A2:2012EN 860:2007+A2:2012 (E)EN 860:2007+A2:2012 (E) 3 C.1 General . 35C.2 Test method . 35C.2.1 Pr
26、eliminary remarks 35C.2.2 Testing equipment . 35C.2.3 Projectile for guards 35C.2.4 Sampling. 35C.2.5 Test procedure . 35C.3 Results 36C.4 Assessment . 36C.5 Test report 36C.6 Test equipment for impact test 36Annex D (normative) Braking tests . 40D.1 Conditions for all tests 40D.2 #Un-braked$ run-do
27、wn time 40D.3 Braked run-down time . 40Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 42Bibliography 46BS EN 860:2007+A2:2012EN 860:2007+A2:2012 (E)EN 860:2007+A2:2012 (E) 4 Foreword This document (EN 860:2007+A2:2012) h
28、as been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2012, and conf
29、licting national standards shall be withdrawn at the latest by December 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This doc
30、ument includes Amendment 1, approved by CEN on 2009-07-16 and Amendment 2, approved by CEN on 2012-05-20. This document supersedes #EN 860:2007+A1:2009$. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “ and #$. This document has been prepared under
31、 a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. #For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.$ Organisation contributing to the pre
32、paration of the European Standard include the European Association of Manufacturer of Woodworking Machines “EUMABOIS“. The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B standards on the subject of general safety (see introduction
33、 of #EN ISO 12100:2010$ for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,
34、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 860:2007+A2:2012EN 860:2007+A2:2012 (E)EN 860:2007+A
35、2:2012 (E) 5 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as defined in #EN ISO 12100:2010$. The machine
36、ry concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence ov
37、er the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manufacturers and their authorised representatives of one side thickness planing machines. They are also useful
38、for designers and importers. This document also includes provisions and examples of information to be provided by the manufacturer to the user. Common requirements for tooling are given in #EN 847-1:2005+A1:2007$. BS EN 860:2007+A2:2012EN 860:2007+A2:2012 (E)EN 860:2007+A2:2012 (E) 6 1 Scope This do
39、cument !specifies all significant“ hazards, hazardous situations and events as listed in Clause 4, relevant to stationary and displaceable one side thickness planing machines fitted with an integrated feed and with cutterblock fixed in position and manual loading and unloading of the work-piece, her
40、einafter referred to as “machines“, designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer #including reasonably foreseeable misuse$. #Machines which are designed to work wood based materials may also be used
41、 for working hardened plastic materials with similar physical characteristics as wood.$ This document does not apply to: a) machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; NOTE 1 Tr
42、ansportable motor-operated electric tools are dealt with in #EN 61029-1:2009$ together with #EN 61029-2-3:2011$. b) hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 2 Hand-held motor-operated electric tools are dealt with in #EN 60745-1:2009$ to
43、gether with #EN 60745-2-14:2009$. c) thickness planing machines where the cutterblock is adjustable for depth of cut setting. This document is not applicable to one side thickness planning machines fitted with an integrated feed and with cutterblock fixed in position which are manufactured before th
44、e date of its publication as EN. NOTE 3 Machines covered by this European Standard are listed under #3 of Annex IV$ of the Machinery Directive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cit
45、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. #EN 847-1:2005+A1:2007$, Tools for woodworking Safety requirements Part 1: Milling tools, circular saw blades #deleted text$ #EN 1005-4:2005+A1:2008$, Safety of machinery Human physi
46、cal performance Part 4: Evaluation of working postures and movements in relation to machinery #EN 1037:1995+A1:2008$, Safety of machinery Prevention of unexpected start-up #EN 1088:1995+A2:2008$, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 5
47、0178:1997, Electronic equipment for use in power installations EN 50370-1:2005, Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission BS EN 860:2007+A2:2012EN 860:2007+A2:2012 (E)EN 860:2007+A2:2012 (E) 7 EN 50370-2:2003, Electromagnetic compatibility (EMC) P
48、roduct family standard for machine tools Part 2: Immunity EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified) EN 60439-1:19991), Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested
49、 assemblies (IEC 60439-1:1999) EN 60529:19912), Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified) #deleted text$ #EN 61800-5-2:2007, Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional (IEC 61800-5-2:2007)$ #EN
