EJ T 1027 11-1996 Welding code for mechanical components of PWR nuclear islands Welding procedure qualification of carbon and low - alloy steel《压水堆核电厂核岛机械设备焊接规范 碳钢和低合金钢的焊接工艺评定》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

ANSI IEEE 269-2010 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets Handsets and Headsets《模拟和数字电话机 手机和听筒传输性能测量的标准方法》.pdf

ANSI IEEE 269A-2012 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets Handsets and Headsets Amendment 1.pdf

ANSI IEEE 270-2006 Definitions for Selected Quantities Units and Related Terms with Special Attention to the International System of Units (SI)《特别关注国际单位制(SI)用量、单位和相关术语的标准定义》.pdf

ANSI IEEE 280-1985 Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering《电工学和电气工程中使用的量值的字母符号》.pdf

ANSI IEEE 286-2000 Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation《电动机械定子线圈绝缘的损失角增量测量的推荐实施规程》.pdf

ANSI IEEE 292-1969 Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros《单自由度抑跳速率陀螺的规范格式》.pdf

ANSI IEEE 293-1969 Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros《单自由度抑跳速率陀螺的试验程序》.pdf

ANSI IEEE 299-2006 Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures《测量电磁屏蔽网罩效能的标准方法》.pdf

ANSI IEEE 300-1988 Standard Test Procedures for Semiconductor Charged-Particle Detectors《半导体带电粒子检测器的试验程序》.pdf