EJ T 1212 7-2008 374 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets Part7 Determination of hydrogen by inert gas fusion method《烧结氧化钆-二氧化铀芯块分析方法 第7部分.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

AGMA 09FTM04-2009 New Developments in Gear Hobbing《齿轮滚刀加工的新发展》.pdf

AGMA 09FTM05-2009 Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets《小轴间角和偏心距大于零的双曲线齿轮》.pdf

AGMA 09FTM06-2009 Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair《齿轮副轮廓修形和端面啮合度峰到峰传输错误的相关性》.pdf

AGMA 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering《通过计算机辅助工程优化齿轮的最小传输错误、啮合摩擦损耗和胶合风险.pdf

AGMA 09FTM08-2009 Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application《军用履带车辆上高啮合系数直齿轮的负载共享分析》.pdf

AGMA 09FTM09-2009 Designing for Static and Dynamic Loading of a Gear Reducer Housing with FEA《带FEA的齿轮减速器壳体静态和动态负载的设计》.pdf

AGMA 09FTM10-2009 The Effect of Flexible Components on the Durability Whine Rattle and Efficiency of an Automotive Transaxle Geartrain System《挠性组件对汽车变速驱动桥齿轮组系统耐久性、噪声和效率的影响》.pdf

AGMA 09FTM11-2009 Unique Design Constraints for Molded Plastic Transmissions《模型塑料传送的唯一设计约束》.pdf

AGMA 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation Initiation Progression and Prevention《含断齿故障的微点蚀的分解.起因、开始、前进和防护》.pdf