EJ T 1215-2006 Specifications for ore-bearing aquifer documentation on in-situ leaching sandstone type uranium deposits《地浸砂岩型铀矿含矿含水层编录规范》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

STAS SR ISO 3038-1993 Corrugated fibreboard Determination of the water resistance of the glue bond by immersion《瓦楞纤维板．通过浸泡对胶水连接的耐水性测试》.pdf

STAS SR ISO 3046-6-1990 Reciprocating internai combustion engines Performance - Part 6 Overspeed protection《往复式内燃机性能．第六部分：超速保护》.pdf

STAS SR ISO 3048-1996 Gypsum plasters - General test conditions《石膏膏药．一般测试条件 》.pdf

STAS SR ISO 3049-1996 Gypsum plasters - Determination of physical properties of powder《石膏膏药．粉末的物理性质测定 》.pdf

STAS SR ISO 3057-1993 Non-destructive testing Metallographic replica techniques of surface examination《非破坏性试验．表面检查的金相复制技术》.pdf

STAS SR ISO 3058-1993 Non-destructive testing Aids to visual inspection Selection of low-power magnifiers《非破坏性试验．目视检查的辅助手段．低功率放大器的选择》.pdf

STAS SR ISO 3069-1995 End-suction centrifugal pumps Dimensions of cavities for mechanical seals and for soft packing.《末端抽吸离心泵．机械密封和软包装的腔洞尺寸 》.pdf

STAS SR ISO 3070-0-1982 Acceptance conditions for boring and milling machines with horizontal spindle - Testing of the accuracy -Part 0 General introduction《卧式镗铣床检验条件．精度检验．第0部分：总论.pdf

STAS SR ISO 3070-3-1982 Acceptance conditions for boring and milling machines - Testing of the accuracy - Part 3 Planer type machines with movable column《镗铣床检验条件．精度检验．第3部分：带移动立柱的台.pdf