EJ T 20074-2014 2104 Specification for low enriched fuel assembly of China Advanced Research Reactor(CARR)《中国先进研究堆(CARR)低浓燃料组件规范》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

DIN EN ISO 11733-2004 Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733 .pdf

DIN EN ISO 11734-1998 Water quality - Evaluation of the ultimate anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas producti.pdf

DIN EN ISO 11737-2-2010 Sterilization of medical devices - Microbiological methods - Part 2 Tests of sterility performed in the definition validation and maintenance of a steriliza.pdf

DIN EN ISO 11771-2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771 2010) German version EN ISO 11771 2010《空气质量 时间平.pdf

DIN EN ISO 11782-1-2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1 Cycles to failure testing (ISO 11782-1 1998) German version EN ISO 11782-1 2008《金属和合金的腐蚀.pdf

DIN EN ISO 11782-2-2008 Corrosion of metals and alloys - Corrosion fatigue testing - Part 2 Crack propagation testing using precracked specimens (ISO 11782-2 1998) German version E.pdf

DIN EN ISO 1179-1-2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 Threaded ports (.pdf

DIN EN ISO 1179-2-2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 Heavy-duty (S se.pdf

DIN EN ISO 1179-3-2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3 Light-duty (L se.pdf