EJ T 688-1998 Test methods for microstructure of sintered uranium dioxide pellets《烧结二氧化铀芯块微观结构检验方法》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

ASTM F2733-2009 Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards《火焰危害防护用耐火焰雨衣的标准规范》.pdf

ASTM F2733-2017 Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards《火灾危险防护使用防火雨衣的标准规格》.pdf

ASTM F2735-2008 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing.pdf

ASTM F2735-2008a Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing.pdf

ASTM F2735-2009 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing《SDR9交联聚乙烯(PEX)和升温聚.pdf

ASTM F2735-2009(2016) Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing《SDR9交联聚乙烯 (P.pdf

ASTM F2736-2010 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《波纹状的单壁管和双壁管6-30 in (152-762 mm)聚丙烯(PP)用标准规.pdf

ASTM F2736-2012 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《6到30 英寸 (152到762 mm) 聚丙烯 (PP) 波纹单壁管和双壁管的标准.pdf

ASTM F2736-2013 Standard Specification for 6 to 30 in (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe《6到30 英寸 (152到762 mm) 聚丙烯 (PP) 波纹单壁管和双壁管的标准.pdf