EJ T 708-1992 《轻水堆正常工况和预计运行事件下的工艺流辐射监测设备 一般要求》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

DIN 6351-2-2010 Lathe chucks hand-operated - Jaws with centrical clamping individually adjustable - Part 2 Mounting recess with 1 4 taper《手动车床卡盘 非自定心卡盘 第2部分 带1 4锥度安装槽 n》.pdf

DIN 6352-1-1968 Chuck backplates with 1 4 Locating Taper Basic Flanges《带1 4 定心锥的卡盘座板 基准法兰》.pdf

DIN 6353-2010 Lathe chucks power-operated without trough-hole - Cross tenon type jaw mounting《无通孔动力操作车床卡盘 十字榫式颚支架 》.pdf

DIN 6354-1980 Milling machine arbors with steep taper complete《精加工的大锥体铣刀轴》.pdf

DIN 6355-1980 Clamping Devices Milling Machine Arbors with Taper《夹紧装置 带锥度铣床心轴》.pdf

DIN 6357-1988 Holding arbors with taper shank 7 24 for milling cutters and face milling cutters with internal alignment《内校准的铣刀和平面铣刀的7 24锥柄的铣刀杆》.pdf

DIN 6358-1988 Milling machine arbors with taper shank 7 24 for milling cutter with longitudinal or transverse drive《带纵向或横向传动装置的铣刀的 7 24 锥形刀杆的铣床刀杆主轴》.pdf

DIN 6359-1-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1 Type A with 7 24 taper shank in acco.pdf

DIN 6359-2-1996 Reduction sleeves with 7 24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2 Type B with 7 24 taper shank in acco.pdf