1、BS EN 15016-2:2004ICS 01.100.01; 45.020NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDTechnical drawings Railway applicationsPart 2: Parts listsThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 July2009. BS
2、I 2009ISBN 978 0 580 68445 6Amendments/corrigenda issued since publicationDate CommentsBS EN 15016-2:2004National forewordThis British Standard is the UK implementation of EN 15016-2:2004.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/1, Railway applications.A list o
3、f organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal oblig
4、ations.BS EN 15016-2:2004EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15016-2June 2004ICS 01.100.01English versionTechnical drawings - Railway applications - Part 2: Parts listsDessins techniques - Applications ferroviaires - Partie 2:Listes de picesTechnische Zeichnungen - Bahnanwendungen - Te
5、il 2:StcklistenThis European Standard was approved by CEN on 9 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliog
6、raphical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CE
7、N member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L
8、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All r
9、ights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15016-2:2004: EBS EN 15016-2:2004EN 15016-2:2004 (E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions5 4 Characteristic features of parts list
10、s .6 4.1 General6 4.2 Base.6 4.3 Size 6 4.4 Border .6 4.5 Centring marks.6 4.6 Characteristics of lines and entries .6 5 Specification.7 5.1 Title block .7 5.2 Columns and lines .7 5.3 Data fields.7 6 Entry rules 10 Annex A (normative) Title block .11 Annex B (normative) General layout 17 Annex C (i
11、nformative) Example of a multilingual parts list19 Bibliography 21 BS EN 15016-2:2004EN 15016-2:2004 (E) 3 Foreword This document (EN 15016-2:2004) has been prepared by Technical Committee CEN/TC 256 “Railway applications“, the secretariat of which is held by DIN. This European Standard shall be giv
12、en the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This document has been prepared under a mandate (M024) given to CEN by the Europea
13、n Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This document has been prepared under Mode 4 co-operation with CENELEC TC9X. In the event of an amendment being required to this standard, the co-op TC will be consulted before proceeding to
14、 amend this document. Particular considerations were made to standardize the computerised transfer of the content of the documents, its output on conventional information carrier and its reproduction without loss of quality. Remarks in international standards with regard to document handling are res
15、pected and supported by this standard and if necessary adopted or completed to the well-established procedures in the European railway business. This European Standard “Technical drawings Railway applications” consists of the following parts: EN 15016-1: General principles EN 15016-2: Parts lists EN
16、 15016-3: Handling of modifications of technical documents prEN ISO 21267-4: Data exchange The annexes A and B are normative. Annex C is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europea
17、n Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15016-2:20
18、04EN 15016-2:2004 (E) 4 Introduction In railway business, the customer very often requires, as part of a contract, technical documents in a certain form. In order to support co-operation and effective exchange of information between customers, suppliers and partners, it is necessary to have the docu
19、ment requirements precisely defined. This European Standard refers to EN, ISO or IEC standards dealing with technical drawings. In cases where ISO or IEC standards are not sufficiently precise, this standard gives specific details. These additions to EN, ISO and IEC standards facilitate the exploita
20、tion and the administration of the drawings. These requirements have been drawn up in order to accommodate: the large variety of users; ease of transfer of documents; any specific series of documentation related to the railway material they define. Special consideration has been given to those produ
21、cing drawings by computer or microcopying and their reproduction without loss of quality. NOTE The range of documents covers documents such as specifications, conditions for acceptance or further technical specifications which may not be graphically represented. This is meant to highlight the differ
22、ence between “graphical representation“ and “verbal description“. BS EN 15016-2:2004EN 15016-2:2004 (E) 5 1 Scope This European Standard specifies the requirements for the preparation and reproduction of design parts lists for railway applications. This European Standard specifies the design parts l
23、ist and describes the basic principles, their structure and the minimum requirements of a design parts list. The European Standard applies throughout the total life span of the parts list. This standard applies to all the railway organisations and partners concerned with the design parts list, and t
24、o suppliers preparing parts list on behalf of network users. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed herea
25、fter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 15016-1, T
26、echnical drawings Railway applications Part 1: General principles . EN ISO 216:2001, Writing paper and certain classes of printed matter Trimmed sizes A and B series (ISO 216:1975). EN 61355, Classification and designation of documents for plants, systems and equipment (IEC 61355:1997). EN ISO 10209
27、-2:1996, Technical product documentation Vocabulary Part 2: Terms relating to projection methods (ISO 10209-2:1994). ISO 639, Codes for the representation of languages Part 1: Alpha-2 code. ISO 1000, SI units and recommendations for the use of their multiples and of certain other units. ISO 4882, Of
28、fice machines and data processing equipment Line spacings and character spacings. ISO 10209-1:1992, Technical product documentation Vocabulary Part 1: Terms relating to technical drawings: General and types of drawings. ISO 16016, Technical product documentation Protection notices for restricting th
29、e use of documents and products. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in ISO 10209-1:1992 and EN ISO 10209-2:1996 and the following apply. NOTE In contrast to the use of the term item list in ISO 10209-1:1992, 3.12, the term parts list i
30、s used in this series of standards in accordance with common practise. The parts list is the main document to describe an object, independent of the hierarchy in which the object is situated in the product structure. There is no difference between an assembly and detail parts list. 3.1 parts list fo
31、rmally built-up list for an object, complete as regards to specific purpose and containing all the necessary documents and articles appertaining thereto, giving their name, item number, quantity and unit. Only those summaries are designated in the parts lists which relate to the quantity 1 of an obj
32、ect BS EN 15016-2:2004EN 15016-2:2004 (E) 6 3.2 design parts list created in the design phase where the final product is defined NOTE It defines the design and is neutral with respect to workshop. 4 Characteristic features of parts lists 4.1 General A parts list can be presented as follows: as a sep
33、arate document without drawing; as a separate document with relation to a drawing (separate parts list); entered on a drawing. Any sheet of parts lists shall bear an identification number. When more sheets together form an entity, it shall be clearly indicated on the first sheet which and how many s
34、heets form the entity. All pages of the parts list should correspond with the specimen shown in annex B. Requirements for copying and scanning are to be defined. 4.2 Base Parts list as a separate document shall preferably be printed on white paper with a minimum weight of 70 g/m. In case of entering
35、 parts lists on drawing sheets, see EN 15016-1. 4.3 Size Separate parts lists shall be to A4 size in accordance with EN ISO 216:2001, series A. 4.4 Border The border is shown in annex B. 4.5 Centring marks Reference marks for centring required for the adjustment of the position of the parts list on
36、the setting plane of the photographic copying device, appear in the margin at the locations defined in annex B. 4.6 Characteristics of lines and entries 4.6.1 Optical density All lines and entries including those added during revision should have a contrast of at least 0,7 with respect to base accor
37、ding to EN ISO 6428. 4.6.2 Line wideness of separate parts lists Printed parts lists shall fulfil the same requirements as parts lists on drawings for microcopying and scanning suitability. For fulfilling these requirements, it is recommended to use line wideness according to Table 1. BS EN 15016-2:
38、2004EN 15016-2:2004 (E) 7 Table 1 Line widenesses Wideness (mm) Borderlines 0,7 Main lines 0,35 Other lines 0,25 4.6.3 Characteristics of lettering Separate parts lists shall be printed with lettering having height between 2,3 mm and 2,6 mm and a width of 2,5 mm to ensure microcopying and scanning l
39、egibility. The line and character spacing shall be in accordance with ISO 4882. Entries in parts list on drawings shall be in accordance with EN 15016-1. 5 Specification 5.1 Title block A title block, intended for taking the necessary headings for identification and use, shall appear on all parts li
40、sts. It is recommended to use the same title block format on all pages of the parts list. It is permissible to use a reduced version on the pages following page 1; this block shall as a minimum have the same identification zone as shown in annex A. The mandatory requirements of the title block are d
41、efined in annex A. 5.2 Columns and lines The parts list consists of eight columns for the entry of various data describing the items required for analysis and interpretation of the drawing. The columns are separated from each other by a continuous line of at least 0,35 mm wideness. The layout of sep
42、arate parts list is given in annex B. 5.3 Data fields 5.3.1 General The data fields of the parts lists are given in Table 2 (see also annex B). BS EN 15016-2:2004EN 15016-2:2004 (E) 8 Table 2 Data fields Column Column text Character type Text alignment Language dependency 1 Item number alphanumerica
43、l right No 2 Quantity, no. of pieces alphanumerical right No 3 Unit alphanumerical centre No 4 Title, designation, name of item alphanumerical left Yes 5 Item number, standard code designation alphanumerical left No 6 Material/ technical data alphanumerical left Yes 7 Mass/unit numerical centre No 8
44、 Remark alphanumerical left Yes 5.3.2 Item reference Identical parts shown in the same assembly should have the same item reference. The item reference is a number which is added as a serial characteristic to objects listed in parts lists and shown on drawings. The reference number shall be rising g
45、raded. If a revision causes an item to be removed from a parts list, the remaining items retain their numbers, thus reducing the need to revise the drawing and other associated documentation. The field “Item number“ may be left empty in the parts list section for a single part. 5.3.3 Quantity, numbe
46、r of pieces The column shows the total number of that particular item necessary for one complete assembly (see ISO 7573). If reference to a document shall be given in this column, a capital cross (X) shall be entered (see annex C). When the quantity needed cannot be specified at the design stage or
47、if it is not necessary to specify, the capital letter N (meaning: not defined) shall be given in the field “Quantity“. 5.3.4 Unit Refers to the unit of measure for the quantity. The SI units according to ISO 1000 including their multiples shall be used. 5.3.5 Title, designation, name of item The ide
48、ntification of the specified item or document, wherever possible, shall be the same as the description given on the main document for the item. When referring to standards, the standardised designation for the relevant items shall be used. BS EN 15016-2:2004EN 15016-2:2004 (E) 9 5.3.6 Item number, s
49、tandard code designation Contains the identification number of the item. In case the item has not a specified parts list identification number, the field should contain the following: drawing identification number of the specified item; or parts list identification number; or document identification number, e.g. references to standards, working documents, etc.; standard components which are defined in international or national standards shall use designations as defined in those standards; when specifying raw materia
