1、BRITISH STANDARD BS EN 80416-2:2001 Incorporating Amendment No. 1 to BS ISO 80416-2:2001 (renumbers the BS ISO as BS EN 80416-2:2001) Basic principles for graphical symbols for use on equipment Part 2: Form and use of arrows The European Standard EN 80416-2:2001 has the status of a British Standard
2、ICS 01.080.01 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 80416-2:2001 This British Standard, having been prepared under the direction of the Health and Environment Sector Committee, was published under the authority of the Standards Committee and comes into effect on
3、 15 October 2001 BSI 3 May 2002 ISBN 0 580 38358 X National foreword This British Standard is the official English language version of EN 80416-2:2001. It is identical with ISO 80416-2:2001. The UK participation in its preparation was entrusted to Technical Committee PH/8, Graphical Symbols, which h
4、as the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under th
5、e section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applic
6、ation. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; mon
7、itor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, the EN foreword page, pages 1 to 7, the annex ZA page, an inside back cover and a back cover. The BSI copyright date d
8、isplayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 13629 3 May 2002 Implementation of the European StandardEUROPEAN STANDARD EN 80416-2 NORME EUROPENNE EUROPISCHE NORM August 2001 CENELEC European Committee for Electrotec
9、hnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. E
10、N 80416-2:2001 E ICS 01.080.020 English version Basic principles for graphical symbols for use on equipment Part 2: Form and use of arrows (ISO 80416-2:2001) Principes de base pour les symboles graphiques utilisables sur le matriel Part 2: Forme et utilisation des flches (ISO 80416-2:2001) Allgemein
11、e Grundlagen fr Graphische Symbole auf Einrichtungen Teil 2: Form und Anwendung von Pfeilen (ISO 80416-2:2001) This European Standard was approved by CENELEC on 2001-07-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
12、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (E
13、nglish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austri
14、a, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 81406-:20021 - 2 - Foreword The text of document 3C/601/FDIS, future edition 1 of ISO 80416-2, prepared by ISO T
15、echnical committee 145, Graphical Symbols, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 80416-2 on 2001-07-03. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or b
16、y endorsement (dop) 2002-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-07-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annexes A and ZA are normative. Annex ZA has been added by CENELEC. _ odnEnemesrt notiec Teh xett fo nI ehtretnatoianS ltnaradI dSO 80-6142:0210 saw parpvode by NECELEC sa a ruEopnae natSradd tiwtuoh nay mfidoicaoitn. _ 2egaP 1002:261408NE 2002yaM3BSI3May2002 EN804162:2001
