1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 10 26 N-STATUS No known use. No Replacement Named D. DiGregorio, NA 2004 05 17 Revised Para 3.0 inserted; para 3.13, 3.14 & 4 deleted 1963 06 25 Released F6-1073 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LL
2、C Page 1 of 2 OIL, LUBRICATING - HIGH TEMPERATURE ESF-M2C66-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a turbine type oil (paraffinic base) with resistance to elevated temperatures. 2. APPLICATION This specification was released originally for oil used to
3、lubricate the heater motor bearing. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 SPECIFIC GRAVITY, min 0.865 (ASTM D 1298) 3.2 POUR POINT, max
4、 -10 C (ASTM D 97) 3.3 FLASH POINT, min 238 C (ASTM D 92) 3.4 FIRE POINT, min 252 C (ASTM D 95) 3.5 WATER CONTENT, max 0.1% (ASTM D 95) 3.6 EVAPORATION LOSS, max 5.0% (ASTM D 972 at 149 C) 3.7 VISCOSITY (ASTM D 446) 3.7.1 At 37.8 C 86.2 - 97.0 cSt (mm2/s) 3.7.2 At 98.9 C 8.8 - 11.6 cSt (mm2/s) 3.8 G
5、RAPHITIC CARBON (Colloidal) 3.8.1 Carbon 0.3 - 0.5% (ASTM D 271) ENGINEERING MATERIAL SPECIFICATIONESF-M2C66-A Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 3.8.1.1 Size, max 1 micron 3.8.2 Ash, max 2.0% (ASTM D 271) 3.8.3 Silicon Carbide none 3.9 FOAMING no foam (ASTM D 892) 3.10 NEUTRALIZATION NUMBER, max 0.4 (ASTM D 974) 3.11 OXIDATION STABILITY (min time before oil 2,000 hours (ASTM D 943) reaches acid #2.0) 3.12 COPPER STRIP CORROSION pass (ASTM D 130, 100 C)
