FORD ESF-M3D144-A2-2004 PHENOLIC (PF) MOLDING COMPOUND FILLED - ASBESTOS FREE TO BE USED WITH FORD WSS-M99P1111-A 《不含石棉的填充酚醛树脂(PF)成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:livefirmly316 文档编号:746179 上传时间:2019-01-14 格式:PDF 页数:2 大小:63.41KB
下载 相关 举报
FORD ESF-M3D144-A2-2004 PHENOLIC (PF) MOLDING COMPOUND FILLED - ASBESTOS FREE  TO BE USED WITH FORD WSS-M99P1111-A  《不含石棉的填充酚醛树脂(PF)成型料  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD ESF-M3D144-A2-2004 PHENOLIC (PF) MOLDING COMPOUND FILLED - ASBESTOS FREE  TO BE USED WITH FORD WSS-M99P1111-A  《不含石棉的填充酚醛树脂(PF)成型料  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 11 17 Revised Inserted 3.0; Deleted 3.1, 3.3, 3.4 Corrected numbering 3.2 1987 12 01 Added A3 CF4R-RD107002-87 1985 03 20 Released CF40RD888002-262 Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 2

2、PHENOLIC (PF) MOLDING COMPOUND, ESF-M3D144-A2 FILLED - ASBESTOS FREE ESF-M3D144-A3 1. SCOPE The materials defined by these specifications are filled, asbestos free phenolic molding compounds. 2. APPLICATION These specifications were released originally for materials used for molding commutator assem

3、blies for small motors in automobile accessories, where arc resistance is required. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MOLDED PROPER

4、TIES A2 A3 3.2.1 Specific Gravity 1.75 - 2.00 1.60 - 1.70 (ASTM D 792) 3.2.2 Water Absorption, %, max 0.5 0.5 (ASTM D 570) 3.2.3 Impact Strength, Izod, 25 30 J/m, min (ASTM D 256, Method A) 3.2.4 Flexural Strength, MPa, min 80 68 (ASTM D 790) 3.2.5 Tensile Strength, MPa, min 50 50 (ASTM D 638) 3.2.6

5、 Compressive Strength, MPa, min 140 190 (ASTM D 695) 3.2.7 Heat Deflection 200 250 Temperature C, min (ASTM D 648, at 1.82 MPa) 3.2.8 Hardness, Rockwell M, min 90 90 (ASTM D 785) ENGINEERING MATERIAL SPECIFICATIONESF-M3D144-A2/A3Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 2 of 2 A2 A3 3.2.9 Dielectric Strength, kV/mm, min 10.0 10.0 (ASTM D 149, short time) 3.2.10 Arc Resistance, s, min 180 180 (ASTM D 495) 3.2.11 Ash, %, min 40 40 (FLTM BO 006-02)

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1