1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 02 04 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC , DOTTS ASEAN EMBOSS, WOVEN DOBBY, WSS-M1H1065-A UNLAMINATED 1. SCOPE The material defined by this specifi
2、cation is a woven dobby polyester face fabric. 2. APPLICATION WSS-M1H1065-A has been introduced as an interior trim fabric for use in the B299 ASEAN program Model 2009, as a seat insert. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P1
3、8-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 7% tolerance (ASTM D 3775) Warp 25.7 end
4、s/ cm Weft 19.0 picks/ cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) 228 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp dtex, 470 F288 AJT Weft dtex, 470 F288 AJT ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1065-APrinted copies are uncontrol
5、led Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Solution Dye or as approved by Materials Engineering Solution Dye 3.6 FINISHED OPERATIONS As approved by Materials Engineering Set (Stenter) 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
