GH T 1072-2011 Technical specification of seedcotton yard security 《籽棉货场安全技术规范》.pdf

相关资源

JIS B4313-2008 高速钢双排屑槽麻花钻.技术规范.pdf

JIS B0601-2001 产品几何量技术规范(GPS).表面结构轮廓法.术语、定义和表面结构参数.pdf

JIS B0680-2007 几何产品技术规范(GPS).几何产品技术规范和验收的标准参考温度.pdf

JIS B0641-1-2001 产品几何量技术规范(GPS).通过工件测量进行检验及测量设备.第1部分判定是否符合技术要求的规则.pdf

MT T 626-1996 矿井均压防灭火技术规范.pdf

NY T 682-2003 畜禽场场区设计技术规范.pdf

SC T 2003.1-2000 刺参增养殖技术规范 亲参.pdf

YB T 4257.1-2012 钢铁污水除盐技术规范 第1部分：反渗透法.pdf

GB T 16812-1997 NICAM-728卫星电视信道副载波传送数字声技术规范.pdf

GA 425.1-2003 指纹自动识别系统基础技术规范 第1部分 指纹自动识别系统术语.pdf

猜你喜欢

FORD WSF-M4D774-A2-2006 POLYETHERSULFONE (PESU) 30% GLASS FIBER REINFORCED MOLDING COMPOUND REDUCED FLOW RATE TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M4D774-A)《低流动性的30%.pdf

FORD WSF-M4D779-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 35% GLASS FIBER MICA REINFORCED MOLDING COMPOUND 100% RECYCLED PET TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 35%.pdf

FORD WSF-M4D785-A3-2008 ABS + POLYCARBONATE BLEND (ABS+PC) 12% TiO2 FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%二氧化钛填充丙烯腈-丁二烯-苯乙烯+聚碳酸酯(ABS+PC)混物模塑料v和一起使用(FORD.pdf

FORD WSF-M4D786-A-2006 POLYAMIDE (PA) 66 35% LONG GLASS FIBER REINFORCED HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《3.pdf

FORD WSF-M4D803-A2-2006 POLYPHENYLENE SULFIDE (PPS) 65% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《65%玻璃纤维 矿物增强的聚苯硫醚(PPS)成型料 与标准FORD WS.pdf

FORD WSF-M4D803-A3-2010 POLYPHENYLENE SULFIDE (PPS) 57% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《57%玻璃纤维 矿物增强的聚苯硫醚(PPS)成型料 与标准FORD WS.pdf

FORD WSF-M4D809-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 20% PTFE POWDER FILLED EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%聚四氟乙烯(PTFE)粉末填充的聚对苯二甲酸丁二醇酯(PBT)挤.pdf

FORD WSF-M4D846-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的40%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D881-A-2008 ABS MOLDING COMPOUND CLEAR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯透明模塑料 内部用(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WSK-M4D82.pdf