1、MaterialSpecificationPlasticsQK 000055Polypropylene Homopolymer Polypropylen-Homopolymerisat1 General Information 1 Allgemeine AngabenMaterial: /Werkstoff:Polypropylene homopolymer, low flow characteristic. /Polypropylen-Homopolymerisat, geringe Fliefhigkeit.Symbol: /Kurzzeichen:PPApplication: /Verw
2、endung:Injection moulding type for manufacturing technical parts requiring goodtemperature resistance. /Spritzgietype zur Herstellung technischer Teile mit guterTemperaturbestndigkeit.Trade Name: /Handelsname:Hostalen PPH 2150Supplier: /Lieferant:Basell Deutschland GmbHD - 55116 MainzForm of Deliver
3、y: /Lieferform:Granules /Granulat2 Requirements 2 Forderungen2.1 Values for Documentation. 2.1 Zu dokumentierende Eigenschaften.Properties /EigenschaftenAverage Value /MittelwertStandardDeviation /Standard-abweichungUnit /EinheitStandard /NormDensity /Dichte 0,9 0,01 g/cm3ISO 1183-3Melt Volume-Flow
4、Rate /SchmelzevolumenrateISO 1133MVR 230/5 1,3 0,2 cm3/10 minTensile Modulus /Zugmodul 1300 100 MPaISO 527-1,ISO 527-2Charpy Notched Impact Strength /Charpy-KerbschlagzhigkeitISO 179 / 1eAat / bei +23 C 9 1,2 kJ/m2 Copyright 2004 General Motors Corporation All Rights ReservedPublication Department:
5、GME Specification CenterMay 2004 - Issue No. 3 Page 1 of 3PRD045 - LBSP ST 1 10/03QK 000055 ADAM OPEL AG ENGINEERING STANDARDSProperties /EigenschaftenAverage Value /MittelwertStandardDeviation /Standard-abweichungUnit /EinheitStandard /NormTemperature of Deflection underLoad /Formbestndigkeitstempe
6、raturISO 75-1,ISO 75-2,ISO 75-3Method B / Verfahren B +90 3 C2.2 Only for Information. 2.2 Nur zur Information.Properties /EigenschaftenAverage Value /MittelwertUnit /EinheitStandard /NormYield Stress /Streckspannung 30 MPaISO 527-1,ISO 527-2YieldStrain/Streckdehnung 9 %ISO 527-1,ISO 527-2Charpy Not
7、ched Impact Strength /Charpy-KerbschlagzhigkeitISO 179 / 1eAat / bei -30 C 2 kJ/m2Melting Temperature /Schmelztemperatur+164 . +167 CISO 3146,ISO 11357-1,ISO 11357-3Temperature of Deflection underLoad /FormbestndigkeitstemperaturISO 75-1,ISO 75-2,ISO 75-3Method A / Verfahren A +54 C3 Reference 3 Hin
8、weis3.1 For further information refer to QK 000000 andGMW3013.3.1 Weitere Informationen siehe QK 000000 undGMW3013.3.2 All materials supplied to this specificationmust comply with the requirements of GMW3059,Restricted and Reportable Substances for Parts.3.2 Alle nach dieser Vorschrift gelieferten W
9、erkstoffemssen die Anforderungen von GMW3059, Rege-lung ber die Zulssigkeit von gefhrlichen Stof-fen, erfllen.3.3 Product Liability to ON 202. 3.3 Produkthaftung nach ON 202.3.4 Legal Regulations. All materials must satisfyapplicable laws, rules, regulations and recommenda-tions valid in the country
10、 of usage.3.4 Gesetzliche Regelungen. Die Werkstoffe ms-sen den gltigen Gesetzen, anderen Regelungenund Empfehlungen der Lnder gengen, in denender Werkstoff eingesetzt wird.3.5 Language. In the event of a conflict between theGerman and the English language, the German lan-guage shall take precedence
11、.3.5 Sprache. Im Falle von Unstimmigkeiten zwi-schen dem deutschen und dem englischen Text istder deutsche Text ausschlaggebend. Copyright 2004 General Motors Corporation All Rights ReservedPage2of3 IssueNo.3-May2004PRD045 - LBSP ST G 10/03ADAM OPEL AG ENGINEERING STANDARDS QK 0000554 Notes 4 Bemerk
12、ungenAll test pieces shall be manufactured by injectionmoulding.Alle Probekrper werden im Spritzgieverfahren her-gestellt.5 Coding System 5 Angabe in DokumentenThis material specification shall be called up in otherdocuments, drawings, VTS, CTS etc. as follows:Diese Werkstoffvorschrift ist in andere
13、n Dokumenten,Zeichnungen, VTS, CTS, etc. wie folgt anzugeben:Example: “QK 000055” Beispiel: “QK 000055”6 Release and Revisions 6 Freigabe und nderungenDate /DatumIssue /AusfertigungDescription /Beschreibung03/73 1 First Release /Erstausgabe09/83 2 Was Issue No. 1, date 03/73Environmental protection
14、Cadmium added. /War Ausfertigungs-Nr. 1, Datum 03/73Umweltschutz Cadmium zugefgt.05/04 3 Was Issue No. 2, date 09/83Content completely reworked according to newest supplier information.Tradename was “Hostalen PPH 1050”. Supplier was “Farbwerke HoechstAG, Frankfurt/Main”. /War Ausfertigungs-Nr. 2, Datum 09/83Inhalt nach neusten Lieferantenangaben vollstndig berarbeitet.Handelsname war “Hostalen PPH 1050”. Lieferant war “Farbwerke HoechstAG, Frankfurt/Main”. Copyright 2004 General Motors Corporation All Rights ReservedMay 2004 - Issue No. 3 Page 3 of 3PRD045 - LBSP ST U 10/03