GOST 10100-1984 Hard coals Method for the determination of washability《硬煤 耐洗性的测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

FORD WSK-M4D750-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT)成型料 与标准FORD WSS.pdf

FORD WSK-M4D751-A-2008 POLYETHYLENE (PE) FOAM CROSSLINKED CLOSED CELL 50 kg m3 TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)泡沫化学交联密闭槽 50 kg m3 (与FORD WSS-M99P1111-A一起使用) [使用 FORD .pdf

FORD WSK-M4D752-A-2010 POLYAMIDE (PA) 66 HEAT STABILIZED COOLING AGENT RESISTANT 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的耐冷却剂、受.pdf

FORD WSK-M4D753-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 20 % GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用20%玻璃纤维增强的改性聚对苯二甲.pdf

FORD WSK-M4D753-A2-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷的20%玻璃纤维增强的改性聚对苯二甲.pdf

FORD WSK-M4D754-A-2015 POLYAMIDE (PA) 6 HEAT STABILIZED 15 % GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D755-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为55 D的热塑性聚氨酯弹性体(TPU) 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D755-A2-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 40 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D755-A1)《硬度为40 D的热塑性聚氨酯弹性体(TPU) 与标.pdf

FORD WSK-M4D755-A3-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 65 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度65 D的热塑性聚氨酯弹性体(TPUR)成型料 与标准FO.pdf