GOST 12934-1983 Roll bending machines Parameters《滚道式型材弯曲机 基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

FORD WSS-M4D822-A2-2014 POLYAMIDE 6 (PA6) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-A3-2012 POLYAMIDE 6 (PA6) HEAT STABILIZED 20% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-A4-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MINIMUM 25% PCR CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B1-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B1-2016 POLYAMIDE (PA) 6 HEAT STABILIZED 40% GLASS FIBER MINERAL MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B3-2016 POLYAMIDE 6 (PA 6) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D822-B4-2018 POLYAMIDE 6 (PA 6) HEAT STABILIZED UV STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND MOLD IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSS-M4D823-A2-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维 矿物增强的受热稳定的聚酰胺66成型料 与.pdf

FORD WSS-M4D823-B1-2015 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS FIBER MINERAL (25% GLASS 15% MINERAL) REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf