GOST 1575-1987 Hoisting cranes Series of main parameters《升降起重机 主要参数》.pdf

相关资源

CB T 3454-1992 船用离合器摩擦片结构型式和主要参数.pdf

JB T 6249-1992 氦镉激光器主要参数测试方法.pdf

JB T 6250.1-1992 YAG连续激光器主要参数测试方法.pdf

JB T 6250.2-1992 YAG脉冲激光器主要参数测试方法.pdf

JB T 9490-1999 二氧化碳激光器主要参数测试方法.pdf

JB T 9490-2013 二氧化碳激光器主要参数测试方法.pdf

JB T 9491-1999 氦氖激光器主要参数测试方法.pdf

SB T 10552-2009 切菜机型式与主要参数.pdf

SB T 243-2012 饼干成型机型式与主要参数.pdf

HG T 2123-1991 搅拌器型式及主要参数.pdf

猜你喜欢

DIN 39-2003 Fixed ball handles《固定式球形手柄》.pdf

DIN 390-2002 Hand-wheels dished - Hub hole with straight square《碟形手轮 方头直式毂孔》.pdf

DIN 3900-2001 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread《带有切割环系列LL的非焊接压缩配件 带锥形螺纹的直形末端》.pdf

DIN 3903-2001 Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的肘形螺栓(不用于新设计)》.pdf

DIN 3904-1987 Olive type compression couplings male stud elbows《椭圆形压接管接头 螺柱式插接肘节管》.pdf

DIN 3906-2001 Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的分支T形螺栓(不用于新设计)》.pdf

DIN 3907-1987 Olive type compression couplings male stud tees (stud branch)《椭圆形压接管接头 螺柱式插接三通管接头（螺柱分管）》.pdf

DIN 3913-2001 Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的活动T形螺栓(不用于新设计)》.pdf

DIN 3914-1987 Olive type compression couplings male stud tees (stud run)《椭圆形压接管接头 螺柱式插接三通管接头（螺柱插接）》.pdf