GOST 2287-1988 Flat thread chasers Specifications《平面螺纹梳刀 技术条件》.pdf

相关资源

GOST 19831-1974 Taps dies trapezoidal thread Tolerances on thread《梯形螺纹用丝锥 螺纹公差》.pdf

GOST 21973-1976 Threaded piping joints Joining threads Series《管路螺纹连接 连接螺纹 系列》.pdf

GOST 11188-1982 Taps for metric interference thread Tolerances for threads《过盈公制螺纹丝锥 螺纹公差》.pdf

GOST 2016-1986 Thread gauges Specifications《螺纹规 规范》.pdf

GOST 12464-1967 Threaded bushes Design《螺纹套 结构》.pdf

GOST 17587-1972 Circular screwing dies for metric screw thread Tolerances on thread《公制螺纹用圆板牙 螺纹公差》.pdf

GOST 1336-1977 Thread milling cutters Specifications《螺纹铣刀 规范》.pdf

GOST IEC 60238-2012 Edison screw lampholders《圆螺纹灯座》.pdf

GOST 16868-1971 Threaded spindel ends Dimensions《螺纹主轴端 尺寸》.pdf

GOST 24997-2004 Gauges for metric thread Tolerances《公制螺纹用量规 公差》.pdf

猜你喜欢

STAS 8365 6-1983 Rubber TEST RECIPE FOR TESTING OIL NON EXTENDED SOLUTION POLYMERISED ISOPRENE RUBBERS《橡胶 测试油非扩展溶体聚合性异戊二烯橡胶的试验配方 》.pdf

STAS 8365 7-1982 Elastomeres TEST RECIPE FOR TESTING ETHYLENE-PROPYLENE-DIENE NON-OIL EXTENDED《弹性体 测试乙丙橡胶非油扩充的试验配方 》.pdf

STAS 8365 8-1983 Rubber EQUIPEMENTES PROCEDURES FOR MIXING AND VULCANIZING RUBBER TESTMIXES《混合和硫化橡胶测试混合物的橡胶设备程序 》.pdf

STAS 8366-1969 《硫化橡胶 用黏度计测定橡胶混合物的硫化速度》.pdf

STAS 8367-1990 Cold formed steel sections equal omega-sections dimensions《冷成形钢截面 等奥米加截面 尺寸 》.pdf

STAS 8368-1982 TAPER TWIST DRIL WITH STRAIGHT SHANK FOR TAPERED PINS 1 50 Dimensions《直柄圆锥度插脚1：50的锥形麻花钻尺寸》.pdf

STAS 8369-1969 《有色金属材质、锥形把螺旋长钻大小》.pdf

STAS 8370-1982 TAPER TWIST DRILL WITH TAPER SHANK FOR TAPERED PINS 1 50 Dimensions《锥度插脚1：50的锥形麻花钻尺寸》.pdf

STAS 8371-1980 ROUND STEEL FOR VALVE SPRINGS《气门弹簧用的圆钢 》.pdf