GOST 4071 2-1994 Insulating refractory products Determination of cold compressive strength《绝热耐火制品 室温下压缩强度极限的测定方法》.pdf

相关资源

SH T 0323-1992 润滑脂强度极限测定法.pdf

GOST 255-1990 Ebonite Determination of cross-breaking strength《硬橡胶 弯曲强度极限测定法》.pdf

GOST 310 4-1981 Cements Methods of tests of bending and compression strengths《水泥 挠性和挤压强度极限测定法》.pdf

GOST 13648 2-1968 Board Method of breaking stress and bending strength determination《纸板 在静力挠曲下负载能力和强度极限测定法》.pdf

GOST 16483 13-1972 Wood Method for determination of ultimate strength in cutting perpendicular to grain《木材 对木材纤维横向锯割的强度极限测定法》.pdf

GOST 16483 5-1973 Wood Methods for determination of ultimate shearing strength parallel to grain《木材 顺木材纤维方向劈砍时强度极限测定法》.pdf

GOST 21153 8-1988 Rocks Method for determination of triaxial compressive strength《岩石 体积挤压强度极限测定法》.pdf

GOST 19921-1974 Glued and bent blanks Method of determining ultimate strength in static bending《胶合的弯曲坏件 静弯曲强度极限测定法》.pdf

GOST 27034-1986 Sintered hard metals Method of compression and yield strength determination《烧结硬质合金 受压时强度极限及屈服点的测量方法》.pdf

猜你喜欢

EN 1451-1-2017 en Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polypropylene (PP) - Part 1 Specifications for Pip.pdf

EN 1453-1-2000 Plastics Piping Systems with Structured-Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC.pdf

EN 1453-1-2017 en Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (.pdf

EN 1455-1-1999 en Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 Req.pdf

EN 1457-1-2012 en Chimneys - Clay ceramic flue liners - Part 1 Flue liners operating under dry conditions - Requirements and test methods《烟囱-粘土 陶瓷烟道内衬-第1部分 烟道内衬在干燥条件下操作 要求和测试方法(取代 .pdf

EN 1457-2-2012 en Chimneys - Clay ceramic flue liners - Part 2 Flue liners operating under wet conditions - Requirements and test methods《烟囱 粘土 陶瓷烟道内衬 第2部分 烟道内衬在湿润条件下操作 要求和试验方法》.pdf

EN 1458-1-2011 en Domestic direct gas-fired tumble dryers of types B22D and B23D of nominal heat input not exceeding 6 kW - Part 1 Safety《额定热输入值不超过6KW型号为B22D和B23D的家用直接燃气滚筒式烘干机 安全性》.pdf

EN 1458-2-2011 en Domestic direct gas-fired tumble dryers of types B22D and B23D of nominal heat input not exceeding 6 kW - Part 2 Rational use of energy《标称热输入不超过6kW的B和B型家用直接燃气式滚筒干.pdf

EN 1459-1-2017 en Rough-terrain trucks - Safety requirements and verification - Part 1 Variable-reach trucks.pdf