GOST 938 11-1969 Leather Tensile strength test《皮革制品 抗拉强度试验》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

FORD WSB-M4D732-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D732-A4-2013 POLYPROPYLENE (PP) HOMOPOLYMER GLASS FIBER MICA REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D733-A3-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D733-A4-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D734-A-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND PAINTED APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A 《涂漆用途用热塑性聚烯径（TEO）弹性体成型料 与标准FORD WSS-M99.pdf

FORD WSB-M4D735-A-2010 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的热塑性聚氨酯弹性体(TPU)成型料 与标.pdf

FORD WSB-M4D738-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物 玻璃纤维增强的热塑性聚氨酯弹性体(.pdf

FORD WSB-M4D740-A2-2012 POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) CALENDERED SHEET VACUUM FORMABLE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部可形成真空的聚氯乙烯+丙烯腈混合物(PVC+ABS)压光板 与.pdf

FORD WSB-M4D747-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚（PPE）改性成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf