GOST 18442-1980 Nondestructive testing Capillary methods General requirements《产品质量 无损检验 毛细管法 一般要求》.pdf

相关资源

JB T 56080-1994 大中型水电机组自动化元件 产品质量分等.pdf

JB T 56082-1996 汽轮发电机产品质量分等.pdf

JB T 56084-1996 汽轮发电机氢油水系统控制设备产品质量分等.pdf

JB T 56153-1999 试验变压器 产品质量分等.pdf

JB T 56155-1999 有载分接开关 产品质量分等.pdf

JB T 56178-1999 定子线圈中张形机.产品质量分等.pdf

JB T 56179-1999 冲槽机.产品质量分等.pdf

JB T 56180-1999 防爆电器 产品质量分等.pdf

JB T 56182-1994 中小型水轮机 产品质量分等.pdf

JT T 952-2014 海事测绘产品质量评定方法及要求.pdf

猜你喜欢

DIN 59200-2001 Flat produts of steel - Hot rolled wide flats - Dimensions mass tolerances on dimensions shape and mass《扁钢产品 热轧宽扁材 尺寸、质量和尺寸、形状和质量公差》.pdf

DIN 59220-2000 Flat products of steel - Hot rolled patterned plate - Dimensions mass tolerances on dimensions shape and mass《扁平钢轧材 热轧花纹钢板 尺寸 重量 尺寸偏差 形状和质量》.pdf

DIN 59231-2003 Corrugated sheets and roofing sheets surface coated - Dimensions masses and static values《表面镀涂的波纹薄板材和屋顶薄板材 尺寸、质量和静压值》.pdf

DIN 59350-2008 Precision ground flats and squares - Dimensions mass tolerances《精制地面扁平钢和方钢 尺寸、重量、公差》.pdf

DIN 59370-2008 Bright steel sharp-edged equal leg angles - Dimensions mass tolerances on dimensions and shape《锐缘等边角光亮钢 尺寸、质量和尺寸与形状公差》.pdf

DIN 59610-2004 Lead and lead alloys - Rolled lead sheet for general purposes《铅和铅合金 通用轧制铅薄板》.pdf

DIN 59740-2004 Sheets of wrought nickel and wrought nickel alloys hot rolled - Dimensions and tolerances on dimensions and form《锻镍和锻镍合金热轧薄板 尺寸及尺寸与形状公差》.pdf

DIN 59742-2004 Circular blanks and rings of wrought nickel and wrought nickel alloys hot rolled - Dimensions and tolerances on dimensions and form《锻镍和锻镍合金热轧圆片坯料和环坯 尺寸及尺寸与形状公差》.pdf

DIN 59745-2004 Sheet of wrought nickel and wrought nickel alloys cold rolled - Dimensions and tolerances on dimensions and form《锻镍和锻镍合金冷轧薄板 尺寸及尺寸与形状公差》.pdf