GOST 18863-1989 Helical rotor pumps Basic parameters《单螺旋泵 基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

FORD WSH-M4D293-B2-2013 POLYPROPYLENE (PP) HOMOPOLYMER HEAT STABILIZED 20% MINERAL FILLED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSH-M4D587-A-2005 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED ENGINE COOLANT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐发动机冷却液 20%玻璃纤维.pdf

FORD WSH-M4D669-A2-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 13% GLASS FIBER REINFORCED 100% POST INDUSTRIAL OR 25% POST CONSUMER RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M.pdf

FORD WSH-M4D724-A3-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSH-M4D832-A-2010 POLYPROPYLENE (PP) HOMOPOLYMER 10% WOLLASTONITE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%硅灰石填充的聚丙烯（PP）均聚物成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSH-M4D888-A1-2010 POLYETHYLENE TEREPHTHALATE (PET) 45 % GLASS FIBER REINFORCED MOLDING COMPOUND 100 % RECYCLED TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的100%再生的聚对苯二甲酸乙.pdf

FORD WSH-M4D917-A-2006 POLYAMIDE 6 (PA6) 33% GLASS MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D822-A)《33%玻璃 矿物增强的聚酰胺6(PA6)成型料 与标准FORD WSS.pdf

FORD WSH-M96D25-A2-2000 HOSE AIR CONDITIONING REFRIGERANT (NYLON BARRIER) RESISTANT MEDIUM PRESSURE《中等压力的耐空调制冷剂（尼龙栅栏）的软管［替代 FORD ESA-M2D18-A FORD WSH-M96D25-A］》.pdf

FORD WSK-M11P47-A1-2014 PERFORMANCE STRUCTURAL ADHESIVE REPAIR TO BE USED WITH FORD WSS-M99P1111-A .pdf