GOST 20521-1975 Technology of sewing wares production Terms and definitions《缝纫生产工艺 术语与定义》.pdf

相关资源

HJ T 317-2006 清洁生产标准造纸工业（漂白碱法蔗渣浆生产工艺）.pdf

HJ T 340-2007 清洁生产标准 造纸工业（硫酸盐化学木浆生产工艺）.pdf

JC T 2089-2011 干混砂浆生产工艺与应用技术规范.pdf

NY T 385-1999 天然生胶浅色标准橡胶生产工艺规程.pdf

NY T 386-1999 硫化天然胶乳生产工艺规程.pdf

NY T 924-2004 浓缩天然胶乳 氨保存离心胶乳生产工艺规程.pdf

NY T 925-2004 天然生胶 胶乳标准橡胶（SCR5）生产工艺规程.pdf

NY T 928-2004 天然生胶 恒粘橡胶生产工艺规程.pdf

SB T 10071-1992 挂面生产工艺测定方法.pdf

SB T 10072-1992 挂面生产工艺技术规程.pdf

猜你喜欢

BS S 148-1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)《仅用于锻制螺栓的低镍-铬钢棒规范》.pdf

BS S 153-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (1230-1430 MPa limiting ruling section 40 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件(1230-1430MPa 限定等圆断面40mm)》.pdf

BS S 154-1976 Specification 21 2% nickel-chromium-molybdenum steel billets bars forgings and parts (880-1080 MPa limiting ruling section 150 mm)《规范 5 2%镍-铬-钼钢方坯、棒材、锻件及零件规范(880-1080MPa 限定等圆断面150m.pdf

BS S 156-1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets bars forgings and parts (1320-1520 MPa)《4%镍-铬-钼表面硬化钢(真空电弧重熔)坯、棒材、锻件及零件规范(1320-1520M.pdf

BS S 157-1976 Specification 3% nickel-chromium-molybdenum case-hardening steel billets bars forgings and parts (1180-1380 MPa)《规范 3%镍-铬-钼表面硬化钢方坯、棒材、锻件及零件(1180-1380MPa)》.pdf

BS S 158-1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts《锻制螺栓和螺母的含1%铬-钼钢棒规范》.pdf

BS S 162-1990 Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock forgings bars and parts (1800 MPa double vaccuum melted)《锻坯、锻件、棒材和零件用18%镍-钴-钼马氏体时效钢(1800MPa 双倍真空熔化)规范》.pdf

BS S 163-1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock forgings bars and parts (1900 MPa limiting ruling section 100 mm)《锻坯 锻件 棒材和零件用镍-铬-钼-钒钢规范(1900MPa 限定控制剖面100mm.pdf

BS S 164-2002 1 % Chromium-molybdenum steel billets bars forgings and parts (1150 to 1300 MPa Limiting ruling section 16 mm) (Suitable for welding)《航空航天系列 1%铬-钼钢坯 棒材 锻件和部件(1150至1300 MPa 限制截面部分为1.pdf